Dremel tool recommendation?

Quite a variety of experiences. Brett, when you say use a can opener, do you mean just use the point to scrape out a "V"? Does that work without chipping?
 
I bought a Dremel model #800 (cordless, lithium bat, variable speed to 35,000 rpm)from Sears last week for $70 and it came with a bunch of fittings. For another $6 I bought the craftsman tungsten carbide cutter.
I then traced the template for my new VHF onto the console of my new boat, drilled a hole to get started, and began to cut away. That fiberglass console must be 3/8" thick. First time I ever used this type of tool and did a splendid job. I then used one of the little grinder wheel attachments to smooth everything out. It all worked just fine and the radio looks sweet.
I highly recomend this tool if just for this one job, however I can already see a bunch of uses for it.
john gov.
 
My son uses the model 800 cordless in his shop and would be lost without it.I bought the corded model and like his better.
 
The Dremel brand will last better and give better servcie. I have had good results with both cordless and corded Dremel tools--also a Rotozip with both 1/8" and 1/4" collets. Thru the years I have burned up a couple of Corded Dremel tools thru absolute abuse. It pays to buy the better quality with better bearings and variable speed.
 
I bought a new Dremel in 1972...used it for all kinds of things like weld slag grinding on Harleys..whatever. One set of brushes after 20 years and still going strong. Probably one of the best tools ever made.

It does get hot after a good while, mine is a 306 or something.
 
Well, with opinions all over the map, I decided to go a different direction. I bought a cheapo variable speed "Alltrade" (corded) with a case and 200 attachments from Costco for $19.95. One year warranty, but at 20 bucks even if it burns out quickly, it's no big deal. Thanks for the recommendations. If I use it a lot, I'll go with higher quality when I trash this one.
 
Back
Top