Following Seas

I should mention that my comment that "tabs should be fully up ( retracted )" is information that comes from the Bennett Trim Tab FAQ. It is what they recommend.
 
Ok,
No new knowledge here, but thanks in confirming what I already knew. I really appreciate the feedback and was hoping to find something I did not know.

Pascal,
I guess it depends on the boat, but with my boat I use the tabs to level out the boat(port to starboard), I find the drag while doing that to lessen my efficiency and speed.
 
Our boat a Thompson 44, is hard chine and flat stern, this gives us one h3ll of a ride when hit with a roller or wake from the aft. Just learn to watch for the bow wakers and turn into their waves.

Absolute,

"Suckin Sludge & Havin a Gas"
 
Walter,
I turned off the auto pilot yesterday on the way back from block. We had a good port qtr following sea and I found it difficult to stay on course. My tought was to pick an object on your cousre and have a nice workout turning right and left as I put the auto pilot back on
 
Back
Top