- Joined
- Feb 27, 2003
- RO Number
- 11204
- Messages
- 10
Goodness, this has been a problem.
After testing EVERYTHING, positive/negative for good voltage, checked continuity on negative/negative and pos/pos, I thought it was the connector.
I cut it to find no corrosion, but for some reason I tested the bare wire inner and outter (shielding I think) for continuity.. IT HAD IT. I didnt see a break in the wire anywhere where it rubbed, etc.
Could this be an antanna issue?
After testing EVERYTHING, positive/negative for good voltage, checked continuity on negative/negative and pos/pos, I thought it was the connector.
I cut it to find no corrosion, but for some reason I tested the bare wire inner and outter (shielding I think) for continuity.. IT HAD IT. I didnt see a break in the wire anywhere where it rubbed, etc.
Could this be an antanna issue?