No water to the bowl

Brian

Member
Member
Joined
Mar 2, 2000
RO Number
64
Messages
334
I have electric toliet. Just put boat in the water. Ran the toliet but no water to the bowl. I took over the hose and ran it it appeared to be sucking. Maybe a little weak. What should i look for. I don't know if jabsco or raritin but I would think they both work basically the same way.
 
If you have a raw water flush head possibly your seacock is still closed? It depends on the head we need to know more fresh water or raw water intake? What type and model head do you have?
Bill
 
It is raw water flush. I thought maybe the pickup had been painted over. I had a friend help me paint the bottom. Anyway what I did to see if that was a problem is I took a vacuum and reversed it and blew air thru the line. I could feel the bubbles hitting the bottom of the hull so I know that is not the problem.I am 95% sure it is a raritan 1985 vintage. It did work the last time I used it in 10/07. Is there a blowup on the raritan site?? I am going to guess there is an air leak somewhere.
 
If it is a Raritan electric of 1985 vintage, I'd have to say it's about 95% likely to be a Crown Head. Back in that time frame, the Raritan Crown Head had pretty much cornered the market for electric marine toilets.

See the "sticky" up top: Raritan Crown Head, Spring Commissioning.
 
Ordered what I need from Raritan. Everything is working. The air inlet is spitting out some water when flushed. What causes this?
 
Are you talking about the plug on the side of the intake pump with the little mesh screen in the middle of it? Is so, send me a PM:

vic (at) raritaneng (dot) com.
 
Back
Top