This Could be Love.....

While I have not been on the RaptorIII,I have had the pleasure of running two 48' Jarvis /Newman boats. I disagree that she is difficult in following sea, in fact she should be a pleasure to handle. These are great sea boats and usually fast for their design. Much depends on the engine and the power train.

This is a classic look at a clasic design. They are still being built and there is always an active and strong market for Jarvis/Newman boats.

John
 
quote:

Originally posted by HIGHLIFEII

"Selling the current boat is the biggest hurdle....Well that and money!"

Isnt it all about the money?

I think the 18knt cruise is optomistic. Although that boat will be great in a head sea it will be a wet ride. In a following sea you will be quite busy.

Not that downeast boats are bad but you have to seatrial it in some crappy weather to get the feel of them.

In thios day & age of boat sales, depending on the actual condition & survey, I would probably offer $70K & be prepared to put in $15k after purchase.






I have over 20 trips on that boat and know the owner. Note, I wrote that boat, not one like it, the actual boat in the ad.

Ergo, I feel a little qualified to tell you:

I think the 18knt cruise is optomistic. - WRONG

Although that boat will be great in a head sea it will be a wet ride. - WRONG

In a following sea you will be quite busy.
- WRONG
 
I'm going to be in Wickford in a couple of weeks and I'd love to go see this boat. The problem is (aside from having to sell my current boat to afford this one), that 48-feet is just too much boat for me. I'm a pretty experienced boater and I can handle my current 34 ft. Silverton competently even in bad conditions but this boat is 15 ft. wide and weights almost 39,000 lbs., and that's probably dry. Add 7,200 lbs of diesel fuel to fill those four tanks and say another 10,000 lbs of equipment, appliances, etc., and we're talking a lot of boat.

I'd love to own just one Royal Lowell designed boat before I check out but I also know my own limitations. I'll have to leave Raptor III to those of you with bigger exhaust pipes than I have.

Bill
 
Bill, the bigger and heavier the boat, the easier to handle. If you can manage your 34 Silverton, you could handle a 48. Biggest difference you'll find is it's a lot more boat to keep clean! :)
 
quote:

Originally posted by Woodsong

Bill, the bigger and heavier the boat, the easier to handle. If you can manage your 34 Silverton, you could handle a 48. Biggest difference you'll find is it's a lot more boat to keep clean! :)






How about his 34 Silverton is twin screw and Raptor III is a big giant single.

I have pictures of her out of the water that I took last year for someone interested if anyone is interested in seeing the bottom shape.

They wont post for some reason but I can e-mail them.
 
quote:

Originally posted by Chesagansett

<<....."The Ocean State was in my rear view mirror in September 1978.
Other than the seafood, big hair and the Cranston twang there is not much to go back to.
Ray was my high school buddy's Godfather...Literally."...>>

... It's gotta beat the James River and Alled Chemical.

"Save the Ray".






"Save the Ray"...That's funny!

We have the chemical thing covered.

LINK
 
quote:

Originally posted by chriscraft67

I'm going to be in Wickford in a couple of weeks and I'd love to go see this boat. The problem is (aside from having to sell my current boat to afford this one), that 48-feet is just too much boat for me. I'm a pretty experienced boater and I can handle my current 34 ft. Silverton competently even in bad conditions but this boat is 15 ft. wide and weights almost 39,000 lbs., and that's probably dry. Add 7,200 lbs of diesel fuel to fill those four tanks and say another 10,000 lbs of equipment, appliances, etc., and we're talking a lot of boat.

I'd love to own just one Royal Lowell designed boat before I check out but I also know my own limitations. I'll have to leave Raptor III to those of you with bigger exhaust pipes than I have.

Bill






Drool for me while you are there.
 
quote:

Originally posted by In the know

quote:

Originally posted by Woodsong

Bill, the bigger and heavier the boat, the easier to handle. If you can manage your 34 Silverton, you could handle a 48. Biggest difference you'll find is it's a lot more boat to keep clean! :)






How about his 34 Silverton is twin screw and Raptor III is a big giant single.

I have pictures of her out of the water that I took last year for someone interested if anyone is interested in seeing the bottom shape.

They wont post for some reason but I can e-mail them.








Opps! I didn't notice she is a single screw! Ok.. there will be some adjustment but my trawler is a single screw- really not too bad at all and easier than most would think....just don't ask me to back into my slip yet- I much prefer going bow in! :)
 
David, IMO, the Jarvis/Newman 48 is one of the finest riding/handling vessels for her size. With a single screw these boats handle extremely well in tight spaces, they are rugged and steady, they are fast. This the hull that so many Maine and New England lobersterman trust their lives to in all kinds of weather.

There is no sea ray that will come close to the overall performance of this hull.I am a big fan of old heavy Hatts and love the Buddy Davis boats. The Jarvis/Newman is IMO. superior overall, to these two boats.

Jarvis/Newman is like a fine auto, well designed, well made and a dream to drive. Go for it,if I was ten years younger I would be tempted to go buy it.:)

John
 
Back
Top