So I've been posting to the Engines thread about my leaky window of which I think I have a good temp fix having removed half the screws on the window and pulled out just enough to scrap old sealant and add some new 3M 4000 and rescrew. Also, did the "small bead" along whole top of window in prep for removal in the winter/spring for full re-bed. My question is has anyone done this on this model 31' Carver Exp? Seemed as I removed screws, window, if I were looking to pull it all the way out, did not want to cooperate.
Below is the port side window, starboard is the one I'm going to remove.
Below is the port side window, starboard is the one I'm going to remove.