Back in the eighties at Praia do Vitoria, Terciera, Azores, we almost lost a 100 ft tug due to tripping. Tug was using a tow hook with quick release pulling the ship's bow off the pier, up wind, so the ship could depart and clear the down wind breakwater to port. The 5 inch diameter, synthetic 8 plait Tow line led from the ship's starboard focsle to the tug's tow hook. The ship went full ahead with 20 degrees left rudder before releasing the tug (bad commo from the Pilot). The tow hook jammed against the stop on the "H" bit and would not release. Tug crewman hit the line with a fire axe, didn't hurt the tow line and the rebound almost carried the crewman over the side. Ship's bosun touched the tow line at the focsle with his knife. Line parted, snapped 200 feet back to the tug without touching the water, and crushed three empty 55 gal lube oil drums forward of the "H" bit. No one hurt, amazingly. After that I had the machine shop fabricate 3 ft long, 3/8th inch thick "machete" type knives with very sharp, serrated edges, for emergency line parting use. Fortunately, never had to use them.