Cedar strip kayak

Wingspar

Member
exMember
Joined
Jan 1, 2000
RO Number
1979
Messages
331
As I don't want to hijack Ricks thread here is some of the info on the kayak I built. This is the first one I built and probably the last as I prefer large scale model airplanes.

It was built from plans obtained for "Laughing loon" This Kayak is the Georgian Bay. Excellent plan with very detailed instructions. Even a Cave man could do it. Made a strongback to hold the frames. Cedar was bought locally and the strips were cut at a local lumberyard. I couldn't get a contrasting strips local so they were ordered out from out of state. No nail were used to hold the strips. I used hot glue and instead. Probably around three hundred hour to complete.

k3.jpg


k2.jpg


Dave
 
ABSOLUTELY BEAUTIFUL!!!

I'd be afraid to use it for fear I might scratch it :(
 
I want to see pics of the planes!! I fly R/C as well and have a blast doing the 3d stuff. Oh yeah, and the kayak looks great and I have considered making one as well. I'd have to move the planes off the workbench and that isn't happening for a while!! LOL!!
 
The kayak weighs in around 45 lbs. It could be built lighter but I added more fiberglass to the inside cockpit area with more reinforcment as I'm a tad bit heaver than your average kayaker.

And to jtsmlarson here you go.

A Focke-Wulf A-8/R2 with a wingspan of around 113". Power is by a 250cc radial engine spinning a Solo 30" three blade prop. Work has been slow on it as I've been working on the boat every week-end for that last six month and will probably continue to do so until the end of September.

fw2.jpg


fw1.jpg


fw3.jpg


fw4.jpg


Dave
 
Nice looking bones for that bird! I like the looks of the Focke-Wulf and the radial engine will be a nice touch! I've got an old Morton radial that I should get running just to show my son before he leaves the house! Cool! Thanks for sharing! I'm 50/50 timewise boats and planes!
 
Nice work! I've been meaning to build one of these for years too. Absolutely gorgeous.

What did the yard charge for cutting the strips out of curiosity?
 
Is that an access hatch in the bow?

Yes and also in the stern. It's keyed into one side and has a latch on the other site that you can release through a small finger hole.

What did the yard charge for cutting the strips out of curiosity?

I ordered out 20' x 10" lenghts of clear cedar. I told the guy I needed some cuts. Ten dollar cut fee charge he told me. Fine with me. Took the boards back and told the guy with the big saw to cut it in 3/16" strips which was fine with him. [:-jump]

The fun part was tying together all those strips and strapping them on my wife's Escape to the front bumper all the way to the rear and beyond.

I still have a bunch of strips left.

Dave
 
Back
Top