Cleaning a flame arrestor

b_arrington

Member
exMember
Joined
Jul 21, 2005
RO Number
18340
Messages
552
I noticed the other day that my flame arrestor is pretty dirty - has some oily dirt coating the tiny mesh grid.

What's the best way to clean this thing? I'd imagine that it would restrict the airflow. It's aluminum, so I don't want to damage it. There are a couple layers of metal too, so I'm not sure a brush is the best way to go.

- Brad
 
I use gasoline. Soak it and move it around for 3-4 minutes in a small pan and then hose it off. Then soak it in soapy water and hose it off to get rid of any sticky residue. Air dry and reinstall.
 
quote:

Originally posted by Ponce

Msibley, I don’t mean to sound like a smarty, but we are talking about cleaning DIRTY flame arrestors, correct? I don't think it’s good to be sucking cottonwood and other debris into a carburetor. Just my opinion after 21 years of boating.






Want to try the question one more time? What are you referencing?

-edit--

I see what you're referencing. You like to oil your F/A because you think by oiling it, it will prevent ingestion of foreign matter.

November Charlie and I both said "don't oil it". NC is Coast Guard, Ponce. Oiling will attract and build up foreign material faster to the point of cutting off the air flow to the throttle body. Also, if you're using an OEM F/A, the spacing between the aluminum fins in conjunction with a cover doesn't allow that kind of ingestion.

One more thing...IF you were to have a backfire thru the carb with flames...well, you see where oiling may not be advisable?
 
Toss it in the empty dishwasher on pot scrubber mode. Easiest and cheapest.
 
Oh Mike, I thought pot scrubber mode was for the bong!
 
Just wondering - why did this thread pop up after I started it 7 months ago?
 
Silverton did it! I guess winter is getting to him, but hey, he isn't in the snow!!!!
 
Ugh, I don't want to hear about snow. I'm not in Oswego or anything, but we're supposed to get a storm tonight.
 
I go for simple. I've done the brake cleaner and degreasers and brushing, etc. too much hassle and mess. try a power washer or local car wash with high pressure wand. Steam also works great. Doesn't take much effort, and results are perfect.
 
A bucket and a quart of Xylene (Xylol). Swish it around. you have enough X to clean two.
 
Back
Top