Cost to buff hull

Woodsong

exMember
Member
exMember
Joined
Jan 29, 2006
RO Number
20095
Messages
2,559
Never having hired someone to do this before, I am curious. What are most folks paying to buff/compound/wax exterior of hull from waterline up to basically rubrail? For our little 36' with no portlights in exterior of hull I was given a price of $15 a foot...seems high to me for just the hull and no superstructure??
 
I paid $12 for hull and $10 for superstructure compound and wax.
Boat wash is $75 weekly from Chicks Cleaning service and the Chicks really are eye candy yet do excellent work.
 
Geeeeeezzzzz. I'm glad I do the washing and buffing/waxing. Sounds like cost of ownership would really be high if I was paying for those!
 
Back in '08 I paid $1500 for compound and wax job on a 36DC Mainship in Mi. That price was the whole boat.

Niles
 
Payed $900 for our 43 last yr. with comp and pure wax. I was impressed with the job, since it was done in the water.
 
I wish I could find somebody who wants to work. The are a few around here who call themselves "pros". They should be calling themselves "prositiutes"....and not good ones.

If you are on the hard, it may be worth your while to attack it yourself. The newer products work on the molecular level and are nothing like paste wax days of old.
 
There seems to be confusion as to the difference between a wax job and compounding even here, which basically makes my next point.

The very first thing you need to do is define what is being done. A true cut/polish/wax at 15/ft is not at all a bad deal. But if this is just some joker doing a little cleaner wax applied with an electrical buffer seen on TV, then its a complete rip.

I was quoted around $1100 for my 48 by a reputable guy. I wish I had gone for it. Given the number of hours I put in myself, the $1100 was chump change.
 
I had the Hatteras completely detailed this spring. Most of it just needed Finnesse-It II for the buff part, but few places topside needed some more aggressive initial attention because they hadn't been done in a few years. Then Rejex in lieu of wax. Complete go over on the metal, which didn't need much elbow grease, but a full application of Collinite Metal Wax with a coating of Fleetwax on top of that. $30 foot.

I'd had the rub rail down done about 1 1/2 years prior with Finesse-IT II and Rejex, really held up great through several thousand miles of salt water cruising. Couldn't imagine using anything else now.

George
Hatteras 56MY
Boston Whaler 130 Sport
 
Tony the guys that do a lot of the detailing work on our docks at Bald Ridge charge $12 per foot.
 
That hull has the fake plank lines, that is extra work, $15.00 per foot is a fair and reasonable price to compound and wax.
 
I used to own a Marine detailing company. We used to charge $10 per foot for the hull and another $10 per foot for the rubrail up. It equaled out since there is more surface area on the hull and less topside but a lot more work topside than the flat hull surfaces. This was for compounding and polymer polish.
 
Why not pay by the hour. Some boats will only need a minor rub out while others may need 3x as much. Below the rub rail should take less time per sq ft as above the rub rail. A 36' boat should take at least a day to do the sides if done quickly without regard to then final finish. If the guy is concerned about how it looks and holds up then 2+ days may be in order.
 
Joey,
Is that Thomas you are talking about? I left his card in my office earlier today before going over to the boat- I should call him if that is who you are talking about. J.T. gave me the quote referenced above...he's doing the glass repair work and prep for topside painting, possibly the painting itself, and also doing the bottom paint. He is giving me some good pricing on rest of the work and I didn't want to quibble over a few bucks a foot since he's doing so much more at a great price for me. They tore open part of the foredeck to inspect and have ordered the synthetic coring material to replace...should make a lot of headway on the deck repair this week and next!
 
I usually have the entire boat detailed (compound as needed) when she's out of the water for any other reason. This runs me about $1,200 around here (W. Central FL). To have the boat detailed in the water runs me from $650 to $800 depending on how bad I let is get before calling a pro in.

I prefer to do the work myself and even have all the right gear. Just never seem to have the time or am suffering maintenance fatigue.
 
Obviously, one foot of my bigger boat encompasses a bit more square footage than one foot of my Whaler, or anything in between. The price I posted is just what her estimate worked out to. The best bet is to get someone with a reputation, by asking around to people with good looking boats. Fortunately, this is one of those trades where the quality of workmanship over time is quite visible. Better to pay up, if necessary, for someone with lots of happy customers.

George
Hatteras 56MY
Boston Whaler 130 Sport
 
My wife and I do our boat for free. Talk about fun...
 
Back
Top