I've had great luck repairing dinghies, both Hypalon and pvc.
First, buy a two part adhesive.
Second, the part most people get wrong. Get all the old glue off the dinghy, I use 40 grit on a sanding block, to remove the thick caked on yellow stuff, then a 3m pad soaked in MEK to finish.
all the air must be out of the dinghy, to that the patch or rejoined seams can be squeezed together.
mix up a batch of the adhesive, I use a clean finger to apply it, and spread it out so thin that you can just feel it starting to tack.
wait 20 minutes.
That wasn't 20 minutes, have another beer.
do another thin coat the same way.
another 20 minutes.
last thin coat.
wait another 20.
apply the patch or join the seams, put some weight directly onto the patch.
twelve hours later inflate, but not to full pressure, let it sit for a few hours, the patch will stretch a little.
then fully inflate and you're done.
It's a lot of work to get right, but I'm still using my rib that the tubes had become detached from the bead five years ago.
Also, the dinghy repair stuff that you put inside the tubes is really designed for dinghies that the fabric is so old it's become porous, and air bleeds through it.
One last thing, a dinghy that's got too much damage to repair, can become a work float if you fill it with expanding foam and let it harden.
Best, Joe.