Dinghy Tie Up Question

BornToBoat

Member
exMember
Joined
Jun 9, 2005
RO Number
17774
Messages
371
I am considering a new marina that does not have fingers. So it's stern in with piles at the bow with a ring to tie a line to. The line runs from the ring to the dock, and ties to the aft cleat along the way. To keep the stern of the boat from swing port to starboard in the slip, everyone has stern lines cris-crossed.

My problem is that I have my dinghy on weaver snap davits on the swin platform, so I can't tie cris-crossed at the stern becaus ethe dinghy is in the way.

What is a good way to tie the stern in this kind of slip?
 
Even if you if you attach crossed stern lines farther forward on the ring-to-dock lines to clear the dinghy, won't the dinghy still be in the way of getting on/off the boat?
 
How about adding retractable cleats on your swim platform, I have seen this setup before.
 
Would your swim platform set-up allow the installation of cleats on the vertical aft face of the platform?
 
I had the same setup (Weaver Snap Davits that is), I just didn't criss cross them.
 
Back
Top