Do you consider this shrinkwrapped?

rommer

Active member
Member
Joined
Oct 5, 2003
RO Number
12280
Messages
6,037
A friend of mine signed a purchase argeement to buy a boat. The closing is in the spring and he gave a substantial deposit. Part of the agreement was that the boat was to be shrinkwrapped.

After quite a few delays he was told the boat was finally wrapped the other day. Another friend just sent him this picture.

toddboat.jpg


Do you consider that shrinkwrapped?
 
BTW - he asked me what I thought. My understanding has always been that when you shrinkwrap a boat you do the entire thing not just the bridge! But I've been wrong before.
 
Here in the frozen north, that shrinkwrap job could be a recipe for disaster. I have an aquaintance who tried a cheap job like that....then comes heavy snow, then some thaw cycles, cockpit scuppers and drain hoses fill with ice and will no longer drain...more and more snow builds up, turns to ice...add a little rain to the snow and ice now trapped in the cockpit....immense weight....lots of damage. If that boat is in a snow belt, Id scream until they covered it correctly, or be up there with a shovel every time it snowed........just my 2 cents worth.
 
I agree Terry but wanted to see what others have to say. I think the best part is the $700 charge for doing a half a$$ed job!
 
I would not consider that wrapped. We have done bridge/cockpit wraps for customers who asked to have only those items done, but we don't like to do that, we'd rather wrap the entire boat as it is easier to do than portions.
 
That's only half the job. If they want all the money - do the full job. That's an economy half a$$ job done to save money. This is not what a new boat from a dealer deserves, especially now in this economy.
 
I guess someone could call it shrinkwrapped; I've never seen one done like it. It look's like a $500 job. I would think to do it right would cost well over $1000. In my area they charge $20 a foot but that is for small boats; under 9' beam.
 
I cant believe that after I voted no I saw the results and it was 51% no and 49% yes. I would love to see who says yes and offer to shrink wrap their boats and do work for them. That is the most sorry excuse for a shrink wrap job I have seen in a while. I wouldnt pay them a dime and I would make them take it off and start over.
 
Definetely not. And for $700. Full shrinkwrap for a 30' around here, with a door is a little over $300. Definetely should be redone correctly or $$ fully refunded.
 
This is a terrible job, and any payments should be returned. By the way the shrink wrap should also cover the swim platform. We actually keep the dink on our transom davit and they bring the covering back over the dink as well.
 
Looks like a new 34 Conv Silverton. I'd be mighty upset if I paid for shrink wrap and got that.
 
Goat Locker, I am with you, who voted yes? 50 people vote yes, but not one of them take the time to defend their vote.
As far as I am concerned, the boat might as well have no shrink wrapping if that is all they are going to wrap.
After thinking about this, I might just cancel the sales contract. If this is the service the dealer will provide, time to look for a new dealer.

Ken
 
i think it's wrapped. they just shrunk it way too much. j/k. i'd scream bloody murder too.
 
I voted and saw the results, 63 no 63 yes. My guess is the guy that did the shrinkwrap, has signed up here and votes yes every time someone votes no.

I was going to say the reason I say that is because the only one dumb enough to vote yes has to be the guy that diud the job, but that would not be a nice thing to say!
 
Unless he specifically said just to do the bridge I would not consider that a proper shrink-wrap job. BTW, I paid less than that to have my 38' shrink-wrapped down to almost the water line and they did a nice job.

John
 
Our 30' Doral Prestancia is shrink wrapped every fall. $300.00 cash pays for shrink wrapping to encapsulate the boat including the swim platfrom almost to the antifouling paint all around. They do an excellent job.

On a purchased boat, I wouldn't consider the shrink wrap (as the picture shows) complete.

Mike.
 
Back
Top