Finally took some pics

Skeetobite

Member
exMember
Joined
Sep 10, 2006
RO Number
23118
Messages
593
Been working on this boat for 2 years. Time to put up a couple of pics. She's filthy in these pics, but she's all ours! We anchored in a nice cove behind Longboat Key the past couple of nights. Back home today :-(

jfishkey1.jpg


jfishkey2.jpg


jfishkey3.jpg


jfishkey4.jpg
 
Nice. Looks great.

Especially from up here where it is 18 deg this morning. Brrr.
 
very nice. i like the cockpit awning. is that a sea ray offering or did you have it custom made?
 
Skeet,
Great Pic's
I used to have a 37 dancer from that time period and would love to see Pic’s of the Cummins installed.
Also I think you may have posted this before but how does it run with the diesels?
 
Very nice. At a minimum you picked a boat with Diesels, for me this was my fatal mistake with my boat when I purchased & re-powered. How about some pictures of the helm and interior?
Bill
 
Thanks for the kind comments.

The bimini over the cockpit is custom. It's cantalevered(sp)off the radar arch, sides of the bridge and seat posts. A flap keeps it water tight until it rains sideways ;-)

She runs great with the diesel engines. Jumps up on plane in two boat lengths. I was making 25.3kts (29mph) this morning on the way back to the dock to run her hard for a few minutes. I generally cruise at 18kts for the best economy.

All new:

Interior = 100%
Canvas = 100%
Genset 9Kw
Windlass
Vacu-flush
gauges & gauge panels = 100%
electronics (A to Z) networked
shafts/cutlass bearing and props
all hoses, clamps and wiring (except main harness)
redundant bildge pumps (5 total w/1 rb2@gr5t110v)
New dink and 15Hp 2 stroke (screamer!)
Extended swim platform
Increased all through hull pick ups by 1/4"
Rebuilt both engines
increased raw water pumps & hoses to 2"
New bridge, cockpit and platform carpet
Salon windows tinted (limo)
Touchscreen PC/TV in salon w/network to chartplotter
Quadband high gain cell antenna (have achieved 1.5Mb down up to 6 miles off shore via 3G!)

And a ton of smaller things much longer than you'll take the time to read :-)

I'll put up some before and after shots of the helm and interior soon.
 
quote:

Originally posted by Billylll

Very nice. At a minimum you picked a boat with Diesels, for me this was my fatal mistake with my boat when I purchawsed & repowered. How about some pictures of the helm and interior?
Bill






Yeah, I knew diesel was the way to go. This is my first boat, so I didn't have much of an idea beyond really liking the lines of this boat and reading on these forums that I should go with diesel for a boat that size.

Many thanks to all of the old salts on this forum that helped me (unknowingly) in selecting and overhauling this boat.

Thanks to Pascal for answering my noobie questions a few times over the past two years.

We have since put over 4,000 miles under her hull and plan to continue this trend!
 
quote:

Originally posted by The Other Gary

Nice work,
Got any detail of the deck crane and what make is it?






The crane is custom also. I used a "PowerWinch" model from a Jeep to power the lift. It has 3,000Lbs of lateral torque strength and can lift 1,000lbs. However, my dink is already kinda big for a boat this size. I use the hurley davit (leaning on the port rail) when we're moving around a lot during trips.

The crane collapses down on itself and I have a canvas cover for it.

edited to add: The standpipe for the lift is a 3" stainless tube running down through one of the lockers in the forward cabin and attaching directly to the starboard stringer. The entire lift can be removed and I have a cap for the standpipe.
 
Wow sounds like you did the electronics like we did on our boat. I am curious did you get the Ericsson W-25 for 3G data and a phone line?
Bill
 
Nope, just using a plain old AT&T Tilt teathered with USB and the antenna. I've seen your pics and plan to do some redundancy in the salon with the equipment like you did and add the new TracVision dish this summer. Pretty soon that SeaView mount on the arch will be 4 sale here when I go to the dual mount ;-)
 
Very nice, here is why I went with the W-25, it is direct connected with an SMA RF connector to the amplifier then the bi-directional amp directly to the antenna. I don't like the RF losses that jumpers used to tether a cellular phone or Black-Berry type device to the amp/antenna system. The W25 has 4 ports for a CAT5 network as well as a low power WiFi rebroadcast of the 3G signal so we can take our laptops anywhere near the boat. The phone line portion of the W-25 is a standard RJ11 jack that provides tip and ring that I attached to a multi-line cordless phone system. I chose a 5.8ghz cordless system so the Syrens WiFi box or the W25 WiFi wouldn't get interferance from the cordless phone system. I forward our regular cell numbers to the boat when we are on it. I have about 200 feet of range using the cordless phones or WiFi from either the W-25 or Syrens box. I am just trying to give you some ideas about the total integration of my system. we are happy with our KVH-M3 using Direct TV as the service provider.
Again you have done a great job. I was wondering how we are going to build a crane to pick up our dingy. I like what you have done and will probably do something similar. But I will have to move my life raft cradle/container. What was the cost of your crane? Bill
 
You're making the neighborhood look great Skeet! Nice job!
 
Hi Skeet, very nice pics...we are "window" shopping for a fly bridge and have been looking at Sea Rays...this weather warmed up pretty nicely after that shot of cold air we had last week, huh?
 
You better get to detailing it, Gasparilla is in 13 days!
Nice boat.

Ken
 
Back
Top