For Mercruiser only , stripped shift cable threads

[alien1952]

Like the title says working up a procedure to repair the threads in the gimbal housing. Will keep you posted

 

[alien1952]

Here you go 39/64 drill bit ..6094 , 1/4 inch pipe coupling, 1/4 x 18 NPSF tap , Red Loc-Tite.
With 1 hex machined off, the O.D of the sleeve is .619 leaving a .010 press fit. Once installed tap it thru if preferred but only a 5/8ths depth is needed for the shift cable threads
If needed PM me if you want it done

The new coupling
After some machining
Installed

 

[WALSHIE]

Pretty cool