GM based Mercruisers

Ted C.

Member
exMember
Joined
Oct 13, 2005
RO Number
19299
Messages
103
What effect, if any, will GM's bankruptcy have on the boat building industry?
 
Sounds like Chev and GMC divisions will be maintained. The motors come from the same place.

I believe the motor division could maintained(at a lower volume) in either case.
 
Even if GM went totally under I do not think it would hurt the boating industry. Mercruiser does get some parts from GM. If GM were liquidated, Merc would have a choice to buy some of the assests and be their own manufacture of parts or continue to buy parts from the company that purchased those assests.
 
Chevy and GMC do not make the motors that go into GM cars. GM Powertrain division does.

IF GM decides to drop the making of big block motors, Brunswick is in no position to start buying GM engine plants sorry to say.
 
Keep in mind that government control of Chrysler in the seventies is when they were forced out of the marine market.

GM currently makes marine ready motors, that they sell to Merc, Volvo, etc. Even if they kept making big block v-8's, if they cut out the marine division, my guess is that prices will rise dramatically - or else boats will be running with auto cams and computer controls. If they stop building the 8.1's, say goodbye to new big blocks. I also suspect the 5.7 / 6.2 small blocks are at risk. It won't be a sudden hard stop as far as parts and replacement motors, GM was done with the 7.4's eight years ago, you can still get replacements, and parts - but eventually it will be as difficult as finding a decent Chrysler 440. And just like 2001 when the 7.4's were retired, I can't imagine anything but a hard stop as far as new boats.

http://www.gm.com/experience/technology/gmpowertrain/engines/specialized/marine/marine_engines.jsp
 
I have a pair of Chrysler Marine 280s in my Trojan. I can get inexpensive short or long blocks, heads, exhaust manifolds, etc, all day long.

That's for a 27 year old engine, long out of production.

I wouldn't worry that much about it myself. ;)
 
Naw, if GM stopped all production of large engines, Merc would just shift over to Fords. This is not likely to happen unless GM decides to drop all of its trucks from the line up. Which is very unlikely since there is a huge markup on large vehicles. Remember these engines are shipped all over the world so if they are not made here they will be made somewhere else.
 
aren't alot of them hencho en mexico nowadays?

if the division generates profits, someone will keep it going.
 
quote:

Originally posted by onthecreek

aren't alot of them hencho en mexico nowadays?

if the division generates profits, someone will keep it going.






From my understanding at least the small blocks are cast in Mexico. Same might hold true for the big blocks. I have no idea as to where the machine shop work is done; here or in Mexico.
 
I posted this question a few months ago and the consensus was that there are plenty of aftermarket block makers(block heads?) to fill the niche, maybe even Merc themselves could get licensed.
 
Yes, the effect is that it will be used as an excuse to raise prices.
 
Mercury Marine has two foundries, does cast its own blocks for its own larger outboard motors and formerly did castings for V8 small blocks then sold them to GM.

Mercury is the company that made the blocks for the original Corvette ZR-1.

Economies of scale would be lost so the cost per motor would go up but the ability of Mercury to make its own V8 small blocks exists.
 
I passed a big GM engine plant between Buffalo and Niagra Falls, NY last year.
 
I need diesels anyway. Now if I can justify it to my wife.
Bill
 
Back
Top