GOOD Windlass acting up

Shore

Member
Joined
Apr 15, 2003
RO Number
11418
Messages
598
This worked perfectly fine a few days ago but now it will not pull the rope.It is almost like it is free-spooling.The motor is working both ways easily but you can feed and pull the rope right out with no drag.

It's a GOOD AFD 1/2.It's all rope/rode and no chain.

I took the top half off it and all looks normal but it's not something I know about.

any help would be great.
 
There is a ajustment peice on the side to adjust the tightness of the grip. It will become loose at times. Just spin it in a clockwise direction to tightin it.
 
My Lofrans windless has a manual clutch which is tightned with a clutch handle that inserts in the top. The clutch will loosen if the chain jams and I must tighten it using the clutch handle.
 
I took the top off and I do see the adjustment allen for what looks like a brake shoe.I've tried it all the way and all the way out with no change.It was about halfway out when I noticed it.

When I try and spin the big wheel that has the rope around it from the iside with the top off it will pull the rope pretty tightly.If I pull the rope from the locker or from the outside it just pulls right through.I took the smaller outer cover off and it rotates with the motor moving.I don't want to power it with the cover off.Nothing would hold the top of the worm gear from the motor.I already found the washer that fell off the top.
 
Have you checked out Good's website for technical support?
 
How old is it? The capstans wear down and don't grip the rope.

Contact Good directly, they have excellent customer service and carry all the parts. It's east to replace, I had to do mine a couple of years ago.
 
I tried their support e-mail but it kicks back no good.

I'd understand if the brake wore out but going from tight to nothing makes me think I'm missing something.

It is an older model for sure but everything inside looks very good.

I don't really understand how the free-spool works on automatically.It hasn't been in the water in years.I let it down the anchor down a few times on the trailer and it would hold it just fine..put the anchor back up and it was tight.Then we let the anchor down a couple days ago and it free spooled and has not grabbed the line since.
 
http://www.goodwindlass.com/repairservice/repairservice.htm
 
Call them, a real human will answer your call and help you solve the problem.

My guess is the reason it won't pull the rope up is that the parts that grip the rope in the capstan have worn out.

Mine was doing the exact same thing, one call to Good got me the parts, it was an easy DIY job to replace it.

When I called back a oouple of weeks later for a new solenoid, they remembered who I was and what I had ordered.
 
I can understand the capstans wearing out but they worked great just one time prior.The anchor went down correctly and came up correctly and seated tightly.The next time we got nothing...just free rope.

I did just e-mail them again.That link worked this time.
 
I know they are still around I had them at my boat 3 weeks ago to install foot switches on the bow. Great service and a great product. I had the all rope/rode unit replaced about 3 years ago with an upgraded rope/chain unit.
Bill
 
I did go ahead and pull the tangled mess of rope out.It was all in good shape but knotted up and twisted.I do like the color depth markings..I was wondering what the color chart was on the dash.lol.Now it makes sense.
 
as Hogan said - call them Ph: 609-698-4402 ~ Toll Free: 1-800-780-4655
 
If you want I need to run down to my boat tomorrow morning I will ask the manager if there is a problem at Good I really doubt it. Have you tried calling them? When I was talking to the installers they told me they were busy. They did miss the 1st appointment. The color coded rode is really a great idea and holds up well.
Bill
 
Ok, the guy from GOOD got back to me.He said it sounds like it is free-spooling and to take the small cover off the side and pop the pins out.Clean grease and re-install.Once on the housing adjust the set screws.I did that and nothing.The pins where stuck for sure but now are free.I did it a 2nd time and noticed some hard grease build-up on the white bushing the pins hold to stop the free-spool.Cleaned them out and low and behold she pulled the anchor up...for about 2'.Now it doesn't seem to have enough tension to pull the anchor up any further off the ground.I tried adjusting the tension screw but that got me no more pull on the rope.

I'm not sure if there is a procedure to adjusting this screw?? I tried it all the way in 1st and then about halfway out and got the same result.The screw goes in very easily when sunk in.When backing it out after a few turns it gets very loose.

I'm not sure what to do?

The rope is tight enough to hang the anchor off the ground at this point.I can't pull it out by hand.
 
I have called and left message but no return.The only response I have had so far has been e-mail and that was this morning to get the pins released.

I need to know how the tension arm works/adjust it correctly or if it is worn to badly.
 
Too bad Good doesn't have downloadable service manuals available on line!
 
You may already know this, but you do have to keep some tension on the line for the windlass to work. If you power up too much to take the strain off, the rope will slip. As the rope gets worn, it is more likely to slip without tension. These windlasses are pretty well designed. Let it down, hit the up to lock it. If the capstan is turning, it should pull.
 
Back
Top