GPS/RADAR New Unit

Joeshoes

Member
exMember
Joined
Jan 1, 2000
RO Number
1967
Messages
601
Went to the NY Boat Show today. It was not good in general.

I wish to buy a new Radar/GPS unit for a 30 foot Pursuit. I wish to spend from 3 to 5 thousand. I looked at SIMRAD, Raymarine and Furuno.

Anyone have experience with these new units? Coments good and bad about them?
 
Joe, I would include Garmin on your list. I put a new Garmin 3200 on my boat early last summer. If you look around at Boatfix and other sites that sell electronic equipment you can frequently find closeouts on last years models that are really great buys. Not including radar (which I have not put on yet) I got it all installed for right around $2,000. That included labor to help me put in the new transducer.

What you do you have on your boat now? I took out a Raymarine unit.

George
 
I would include Lowrance, especially if you use your boat for fishing, and ditto on Boatfix prices and deals.
 
I bought my garmin 4208 from boatfix as well, it was the best price I could find. Les went out of his we to make sure I got it quickly for an impending trip (he didn't have it locally but I still had it within a week). I'm very happy with the garmin line,
 
quote:

Originally posted by gcolton

Joe, I would include Garmin on your list. I put a new Garmin 3200 on my boat early last summer. If you look around at Boatfix and other sites that sell electronic equipment you can frequently find closeouts on last years models that are really great buys. Not including radar (which I have not put on yet) I got it all installed for right around $2,000. That included labor to help me put in the new transducer.

What you do you have on your boat now? I took out a Raymarine unit.

George






Geroge

I have an original Furuno (1999) radar which is interfaced to a 8 or 10 inch Garmin GPS from 4 years ago.

I was told the NEW Furuno antenna would not interface with the old Furuno antenna, by the
salesman. The Radar is the focal point of the entire display, right smack in front of the eyes. The smaller GPS is positioned badly down low and to the laft. You have to squat to look at it. A 12 inch screen GPS should be the focal point of the displays.

And no I do not fish at all.

I will check with BOATFIX later.

Joe
 
I am a huge Garmin fan. I upgraded to the latest 6212 from a 4212 plotter towards the end of last season.
I love the NMEA2000 interface and wouldn't consider a plotter without it.
I think Garmin's weak point is it's radar if you don't have a position sensor at real slow speeds you can lose
your bearing and skew the bow's position on the overlay.
Bill
 
quote:

Originally posted by Billylll

I am a huge Garmin fan. I upgraded to the latest 6212 from a 4212 plotter towards the end of last season.
I love the NMEA2000 interface and wouldn't consider a plotter without it.
I think Garmin's weak point is it's radar if you don't have a position sensor at real slow speeds you can lose
your bearing and skew the bow's position on the overlay.
Bill






Bill
What kind of money are we talking about and does Boatfix sell this?
 
Joe, BoatFix has the 4200 series plotters and GMR18 or GMR18HD at least I think they do. I think the new Garmin 700 series is also nice I installed one of those as well off my NMEA2K backbone as a replacement for my Garmin 3205. Personally I could not believe how good the Garmin 700 screen was for it's size screen.
The 6000 & 7000 series plotters can only be purchased through an installing dealer fairly big bucks. Dave who commented above uses a pair of the Garmin 4208 displays and I think the GMR18HD radar.
I really don't remember what I spent. I know the 700 series plotter was less than $2k so was the GMR18HD radar.
You should also look at the Garmin 3210 10" plotters and or the matching GMR41 or GMR-21 radar units.
I have seen excellent deals on these sold as packages. I started with Garmin 3210's before I went "nut's" with the electronics on my boat.
You can get a really nice Garmin system for the price range you mentioned above.
Bill
 
I really like my raymarine E equipment. Les put together a hell of a deal for me when it came out.
 
Bill

The Garmin package looks like what I want but the screen is only 8.5 inches. I was looking for
more like a ten (or 12 depending on price) inch diagonal.
 
quote:

Originally posted by Billylll

Joe, BoatFix has the 4200 series plotters and GMR18 or GMR18HD at least I think they do. I think the new Garmin 700 series is also nice I installed one of those as well off my NMEA2K backbone as a replacement for my Garmin 3205. Personally I could not believe how good the Garmin 700 screen was for it's size screen.
The 6000 & 7000 series plotters can only be purchased through an installing dealer fairly big bucks. Dave who commented above uses a pair of the Garmin 4208 displays and I think the GMR18HD radar.
I really don't remember what I spent. I know the 700 series plotter was less than $2k so was the GMR18HD radar.
You should also look at the Garmin 3210 10" plotters and or the matching GMR41 or GMR-21 radar units.
I have seen excellent deals on these sold as packages. I started with Garmin 3210's before I went "nut's" with the electronics on my boat.
You can get a really nice Garmin system for the price range you mentioned above.
Bill






The Garmin 3200 series has been superceded by the 4200. I highly doubt that there are any more 3210's out there. However, if there are you should be able to get a real good deal.

That unit fits the Pursuit 3000 very nicely. I think the 10" screen is just the right size.

Joe, you will probably have to make a "mask" for the new unit, whatever it is. I used Iroko ( a teak substitute) on my boat. You could also use Starboard. This will cover all of the old holes and give you a mounting surface for the new unit.

George
 
The 4200-7200 series and all the new 500 & 700 series plotters have an SD slot. I use it when ever Garmin comes out with a new software release. It's as simple as taking my laptop to the Garmin site updating the SD card and then inserting it in the plotter. It updates any Garmin device connected to the plotter with the latest release. The whole process takes 15 minutes or less and the updates are free.
Bill
 
Back
Top