Here's a New Idea!

That's a pretty neat idea. I too have dropped the line off of my boat hook trying to get around pilings.
 
I modified a boat hook using aircraft cable, tiller cable clamps and a rubber chair leg cap to create a fixed hoop that I use to easily lasso a dock post or cleat when no assistance is available to me. The cable and clamps create the loop and the cap replaces the hook creating a friendly material in case I need to push off on something. I'm not sure if it would be of great use with larger craft, but I am able to pull my 30' sport cruiser to the dock if winds tend to drift me away from the dock, it's a huge help.
 
Pretty simple idea. I use the same idea to hook my trailer winch hook to the bow eye. I hate to get my tootsies wet.
 
I'm not sold. It's big, seems awkward to set up and a possible source of distraction or unbalance.

Liz, do you use (for lack of a better description) the "throw the loop" technique? Start by coiling your line with about 24"-30" loops on the palm and fingers of your flat, upward facing free hand. Make sure the loops aren't twisted. Then split the coil so you're holding half on each hand. While holding on to each end with your thumbs, separate your hands and allow a loop to fall into the middle. Now you can "swing" and throw the center loop up and around a piling, or down to a cleat. If I described it correctly, even a novice will hit the mark on the first or second try. No fancy cowboy skills or informercial gadgets required. Once you've hooked the object, you can also secure it by passing the bitter end through the spliced-eye and slipping it down.
 
gadgets videos/commercial always look great... often they dont' work as well in the real world.

yes, i often singlehand and i do what i think SLW described or a variation... I put the eyes on the cleats, boat side, then hold the bitter end and throw the bight of the line on the dock behind the cleat... i pull on the bitter end, catching the dock cleat and tie the bitter end to the boat side. Spring lines first, then bow and stern. once all 6 are tied and engines shut down, i can step on the dock and properly secure the lines usually by adding a couple of hitches on the cleats.

When i'm ready to leave, I undo the hitches, get on the boat, then undo the lines from the boat and slip them off.

simple, no gadgets required, minimal cowboy skills needed!
 
I'm for anything that helps in docking! This is similar to something my neighbor rigged up a few years ago. She used some small PVC with connectors to make a square but with one open end. Added some velcro to the tubes so the line stuck to it but would come off once you put it over a piling. At least I think that's how she made it. I believe I still have one in my shed but have no use for it now. It did help when we had our 26' though.
 
That thing to me seems like the old saying - A fool and their money are soon departed.
 
quote:

Originally posted by In the know

That thing to me seems like the old saying - A fool and their money are soon departed.






The fool in this case is the person(s) responsible for the horrible video and audio production of that "advertisement". If you're going to try and sell something like that, at least hire Billy Mays (and he's on the low-end of the scale!). A decent copywriter would help as well (how many times does the voiceover guy say "or" in the first part of the ad?).
 
Hells bells, I could make one for less than $5 or make an adaptor or modify a telescoping boat hook...and the forked part is unnecessary and makes it harder for storage.
 
I like the concept. . . . . .but then there's another thing to stow.

I like the adapter, boathook, velcro idea.
 
This video was produced in our homeport; NorthPoint Marina, Winthrop Harbor, IL. It is the largest state owned marina / harbor in the USA with over 1500 slips.
They drew quite a crowd during their many attempts to get the footage used.Note the additional, larger cleats that were installed just for this video. The issue being the height of the docking vessels deck in relationship to the slip height and distance away. If you don't have the right release angle or a very large, accomondating cleat, it's going to take a few tries. Also, the deckhand working the loop had a tendency to over-extend; reach out too far to accomplish the task thus creating a safety issue.
I'm sure they will sell a few on principal alone,but we watched the trials, and we will not be buying.
 
JUST ANOTHER GADGET!!! If you're into gadgets then buy at least two of them.

However I've found that the "hook" part of an ordinary boathook works really well for supporting a big eye on the end of your mooring line. Just support the eye with the hook and slide it over the cleat or piling. If you don't have big eyes in your mooring lines you need to learn how to make them.
 
Good feedback here! Willie, I think I'll try your idea.

Thanks everyone!
 
I like the part where they advise the "mate" to pass the bitter end thru the cleat and stand on it.
 
While I probably wouldn't touch this device with a ten foot pole one has to wonder where you can conveniently store a 10' pole on a lot of boats.
 
That is why the retractable boat hook idea appeals to me: first, I already have the boat hook; second, when retracted, I stow it along the port side of the cockpit just inside of the window. I use a piece of pipe insulation to keep it from slipping or rattling. Always handy but never in the way except when I clean the window.
 
Back
Top