Hull color question.

Dusty Rhoads

Member
Member
Joined
Dec 10, 2002
RO Number
10868
Messages
820
We have the option of a colored hull on boat being built, and they use Imron for paint. I first only wanted white due to matching, if I hit something, however they say that if it is Imron, it is much easier to match. No fade etc. There are a couple pictured in Yachtworld under Manuf. seahorse and I just wondered of other opinions.
Thanks in advance. btw we would only consider blue or green
 
I had a black imron painted Donzi for 7 years - I loved it and it didnt fade. Only problem was if you hit a dock, the scratches were very visible...but matched paint was easy to find.

In FL I would avoid Red - seems to fade quickly. Otherwise ... why not
 
I have a colored hull.. id never do it again.

Way to much work to keep it perfect . I have pewter and it doesnt show alot i cant imagine a dark color.

Unless u dont have the anal trait then maybe seeing the small scratches wont drive u insane like it does myself.

Rob
 
Mine is dark blue imron,over 20 years old and still shines.We get a lot of compliments on it.I tried to email you a picture but could not get it to work.
 
Thanks for the effort Jim. Have you ever in the past had to touch anything up om the Imron, and was a big production to do so ?
Do you feel the hull is any hotter due to the blue VS white??

Thanks
 
i woudln't get a dark hull, at least here in the south. there is no doubt that dark = hot... i have a 10" black stripe and can barely touch it in the sun....

then, any minor scratch is going to show... and if you dont' keep it perfect (wax, etc...) it's going to show its age, whereas with white you can get away with it...
 
Paint is a lot different than gelcoat. If it were a new boat, and we were talking gelcoat, I would stay stay away from dark colors as they fade, and the heat generated due to the color caused post cure issues.

Paint is a different story. Color retention of newer paints such as Awlgrip is great. There are several grades of Awlgrip and each has it plus and minus. I believe if you research Awlgrip and Awlcraft you will find Awlgrip (urethane)is a harder finish, but is harder to repair, Awlcraft (acrylic) is a more flexible finish, and easier to buff out. I know that Imron was the preferred paint for Hatteras for years. It was also used widely in the trucking industry. Interlux also has its Interthane product that is a softer repairable finish.

Dan
 
There are a few Imron and Awlgrip painted boats where I store for the winter. The paint seems to hold up well but I was told by the owner that they are a problem when it comes time for shrink wrap. He says the shrinkwrap can not touch the painted surface?????
 
Grag,
The shrink rubs when the wind hits it.... I paid extra to have my boat wrapped to below the waterline....

Like i said way to much work...

The local searay dealer started this year only wraping to the the rub rail.... but it left the colored hulls exposed to the sun.... not a good thing... Searay a few years agosent a memo with there first blue hulls to rotate there stock so the same side of the boat wasnt exposed to the sun all the time... things might have changed...but i dont think so..

Rob
 
I thought it was that the shrink wrap may adhere to the paint and actually pull it off???
They've been wrapping just to the stainless bow rail on the painted boats.
 
I was told it was the rubbing, although the awlgrip job on my dads hatteras was damaged by the heat from the shrink wrap gun we believe.

My marina will not shrink wrap painted boats, thus the reason for my new cover.
 
I hope with the new boat, our days of winterizing are over, however that is a point I never thought of.
 
Just this past weekend a friend of mine was telling me of a boat that was painted just a couple years ago with Imron and the it bubbled where the shrink wrap touched it and it all needs to be redone.

I think the dark blue hulls look great, but any scratches really show. Since you're going to be cruising for long periods, most likely in warm areas, I wonder if a dark hull is a good idea.
 
Not sure if you are buying a Diesel Duck or Seahorse--both by the same builder. Actually white is a difficult color to match as any. Avoid the dark colors for tropical waters. A friend repainted his boat black and a year later painted it white again. The air conditioning and refigeration demand was increased by the color change. I have always heard that Awlgrip was a bit better in the marine environment.
 
Diesel Duck? I was at Seahorse a couple of weeks ago and didn't see any being built or hear Bill (Seahorse Yachts owner) speak of them. Not sure if any are still in production or being marketed. That said, Dusty's boat (which I did see being built) is a f/g Seahorse.

BTW, Dusty, I love the look of the painted hulls but fear the upkeep necessary to keep them looking shape. Of course that fear is based on my complete lack of experience with painted hulls so its not worth much.
 
Dusty,
Hopefully if you get a scratch on your painted hull, if you go that route, you will be able to just have another shot of rum or something to help you get over it. In case it is really bad and you need more help, you can always call me and I will come down and help you get over the scratch via beverage therapy.....
 
yesterday after sunset when i went down on the swim platform to hook up the tender, i was surprised to feel heat still coming out of the black stripe where as the rest of the hull was cold. and that was 10' after sunset...
 
Back
Top