Hydraulic swim platform?

billybokay

Member
Joined
Jul 22, 2005
RO Number
18354
Messages
218
So much fun is had on the inflatable that I want to upgrade to a center console ridgid bottom. But to really make it doable I would need to add a hydraulic swim platform to my 40 express. Any one do this as an add on? My concerns are cost and performance both while running with and without the weight on the aft. The big struts they add to the hull must make some difference as well.
 
it adds a lot of weight to the stern and it must be heavily braced/reinforced/backed up... see what both the lift manufcaturer and your boat builder recommend... what kind of boat?????
 
Friend has one, but it is on a 55 foot motor sailor--he loves it--even this is a low speed boat, it does make it stern heavy and somewhat off its lines.
 
A friend looked at doing this to his 50 Bertram a few years ago and he was looking at around $25 grand. He kept the davit on the bow instead.
 
Have someone drive the RIB and follow you. A better solution, IMHO.
 
flutterby

Your kidding right. A 5 hour trip in the ocean to a vacation spot in a rib.
 
We have a GHS hydraulic lift and we love it. Our RIB is about 600 lbs which is below the rated weight for the lift. The boat was specifically designed to accommodate the dinghy and lift both in the way the transom was built and in the placement of the weight.

There is really no way to cost justify this amenity, but that can be said about many boating related items.
 
Sealift looks like it would be perfect for my application. I have the manufacturer preparing a quote.
thanks
 
I have a TNT lift on our 50' Chris Craft Constellation; it was on the boat when purchased. Planning to get a small whaler-type rigid dingy when $ are available. It is only about 2' longer than original platform, so so big deal. I have to agree I'd not buy it myself as too $$, but very nice to have!

Delaware Jim
 
at 40 feet your boat may or may not be able to handle the extra weight. contact the boat mfg and ask them what experience they have with that issue. my boat was designed and initially offered with that option, but the extra weight kept it from being able to plane. good question to ask before you spend 20K on it. i settled for a davit and chocks on the swim platform, saved me about 500 lbs and the boat still planes.

the salesman that i purchased my davit from shared with me a jewel; all the RIB mfgs lie about the weight of their boats, get a scale and pick yours up with it before you select the equipment to lift it on the boat. you'll be surprised how much more they actually weigh, i know i was.
 
I have a TNT on a Carver 406 and really like it. It holds my 11' RIB without a issue. Also, it is very nice to have the platform room when the RIB is off.
 
I do tow it, but not on an ocean voyage for 4 hours. I can not justify the expence of 17 thousand dollars for a hydraulic pump and some stainless steel arms. Maybe they will be like flat panel televisions and the price will continue to drop. Imagine?
 
I have one on the back of my Cruisers 4450. I bought the boat used and the original owner took the hit for the platform. It's very nice to have and we use it regularly for swimming off the back of the boat. That said I can't imagine spending what it cost new in order to have it installed. I decided it would be a nice feature to have so I sought out boats with the platform on. They didn't seem to command any price premium so it was an easy decision for me. Were I in your position I'd look real hard at what the best davit arrangement is available. Seems like no matter what that's got to be cheaper than the retrofitting the platform.

Ben
 
I had TNT Platforms out of South Florida install a hydraulic swim platform on my 2000 450 Carver, which they designed, engineered and installed. Short story, it pulled through my transom and almost sunk my boat, and the company is refusing any responsibility for the problem. Their answer, must be an owner problem but they do not know what it is. No evidence of any damage to the platform or other operator issues, but the company simply does not stand by its products. I am in litigation with them, but they have delayed and avoided things using every trick possible. I highly recommend that you not consider them for anything, as their company philosphy seems to be once we have your money, tough luck if the product is defective. Contact me if you are interested in more details, pictures, etc.
 
Back
Top