Inspecting prop from dock

I never get in the water in a marina, just gives me the heebie jeebie's. Maybee it's because I've always been a lake boater and hate diving around slimey things I can't see. I will say a few times when the prospect of loosing an expensive anchor snagged on a stump was facing me, I was able to quickly overcome above said heebie jeebie's.
 
i dont' like doing in water work at the marina, but it's really because the water isn't that clear... and unfortunately i know that in a marina with no pump out, or where it's a major headache to pump out (walk half a mile carrying the poop hose) most boaters are not as clean as i am....

but if i need to clear a line on the prop, or a plastic bag of the AC intake, i'll do it. Otherwise, i go out and anchor in clear water...
 
Dominic & CurrentSea, How do you maneuver the camera under water? Tape it to a broom handle?

Jim
 
I don't have that camera, I just saw it on ebay and felt it was cheap. The best way to use it is propably with 2 lines. Drop a anchor and run it down anchor line with another line attached to camera so u can move it up and down the rope. Issue would be keeping boat over anchor if not in slip.

That also would be a cool way to check your main anchor is set well or if snagged, what it is snagged on.
 
Jim:

I've done it as Dave describes above and by attaching it to a boat hook with hose clamps/duct tape. A bit of Rube Goldberg, but it gets the job done. I've toyed with making a more eliquent handle, but it's just not on the top of the list...

With the SW on the laptop, you are able to capture and record to the HD. You can also plug the camera into the back of a VCR (remember those) and record to tape. Recording could come in handy if you are putting in an insurance claim.

My version of the Pinnacle SW is not compatible with VISTA, only upto XP...so my laptop is no longer an option until I buy a new viewer.
 
Oom,
How effective is the camera with the murky water we have?
 
I assume you mean me?....:D

Honestly, the water isn't that murky here. It's not carribean clear, but you can see well enough.

In any event, it works well enough to get a good idea. If you bring it in close to the props it works great. There are built in LED lights on the lens.
 
Perhaps after I launch my boat we can look at the bottom to see if it sagged from blocking!!!
 
Thanks for the insight. This sound like a new toy/tool to add to the tool box. I think I’ll spend the rest of the winter looking at options.

Jim
 
You guys are creaping my out with all the talk of electrocution while swimming. We swim all the time in the lagoon behind my house. The lagoon has boats in it of all sizes.
Is there a way to test the water prior to swimming to ensure it is safe?

Jim D
 
I purchased a "SeeSnake" from Ridgid some time ago. Works great. Has a small battery powered 2.4" LCD hand held monitor. The snake portion is flexible and is 3' long I also have an extension that makes it 9' long. Has a small camera and LED lighting at the tip. Completely waterproof. Also great for seeing under your motors checking for sources of oil leaks or items that one may have dropped into the bilge. Its a great tool for the boat and home. Cost about $200. www.ridgid.com
 
quote:

Originally posted by Jim D

You guys are creaping my out with all the talk of electrocution while swimming. We swim all the time in the lagoon behind my house. The lagoon has boats in it of all sizes.
Is there a way to test the water prior to swimming to ensure it is safe?

Jim D






Ask your wife to use her foot to feel how cold the water is!

That See snake is not waterproof. But good point.

Dom,
The underwater camera, will it work above the water too?
 
quote:

Originally posted by CurrentSea

Dom,
The underwater camera, will it work above the water too?






Honestly, I haven't used it in about a year now since I got Vista on my new laptops. However, it definitely 'Works' above the water.

I'll check tonight, if I remember, and read the manual to see if there are any above water restrictions.....the only one I can think of would be cooling. The LED's may need the water to cool them.

I'll get back to you.
 
quote:

Originally posted by Jim D

You guys are creaping my out with all the talk of electrocution while swimming. We swim all the time in the lagoon behind my house. The lagoon has boats in it of all sizes.
Is there a way to test the water prior to swimming to ensure it is safe?

Jim D






Jim, the issue isn't really the boats. It's the shore power connected to the boats. Sometimes the shore power isn't properly connected at the dock, or the boat isn't properly grounded. In either case it can cause stray current to go into the water and a nearby swimmer.

If you're swimming in an area with no shore power you're fine. If you are, there are tests that can be conducted.
 
OK...just read the instructions and there is no issue with using the camera out of the water...Also, and I forgot all about this, there is a heavy cylindracal balast on the cam. That balast can be removed and a broom stick, or similar device, inserted in its place to mount and use as an extension. I remember not using that option because then the camer only looks straigt down the lenght of the handle. I was going to make a U-joint of type of connection, but like I said...it never made it to the top of my list.
 
Maybe a length of 1/2" PVC pipe, with a 90 or 45 elbow in it to take care of the angle??
 
Back
Top