Hello,
My water pump has been tripping the breaker after a minute or so of continuous operation. The pump is an older PAR version of the current Jabsco Par-max 36800. When I inspected the pump, I noticed that the motor shaft appeared to be bent and rotate eccentrically. I'm pretty sure it is supposed to rotate in a circle. It looks like the pump may have been dropped the last time is was out as a gear is chipped and the drive pulley has a chip as well.
In any case, The real question is what is the advantage of a belt driven pump over some of the other types of pumps. anew motor is about $115 plus I will need a new pulley. If it were you, would you
1. Fix the current PAR pump
2. Replace with a new Jabsco Belt Driven Pump
3. Replace with a different pump.
The water system is a 40 gallon tank, Head sink, Head shower, 6 gallon HW heater and galley sink and FW hose in the cockpit.
My water pump has been tripping the breaker after a minute or so of continuous operation. The pump is an older PAR version of the current Jabsco Par-max 36800. When I inspected the pump, I noticed that the motor shaft appeared to be bent and rotate eccentrically. I'm pretty sure it is supposed to rotate in a circle. It looks like the pump may have been dropped the last time is was out as a gear is chipped and the drive pulley has a chip as well.
In any case, The real question is what is the advantage of a belt driven pump over some of the other types of pumps. anew motor is about $115 plus I will need a new pulley. If it were you, would you
1. Fix the current PAR pump
2. Replace with a new Jabsco Belt Driven Pump
3. Replace with a different pump.
The water system is a 40 gallon tank, Head sink, Head shower, 6 gallon HW heater and galley sink and FW hose in the cockpit.