Jack Hargrave-Designer

Tiki Time

Member
exMember
Joined
Aug 20, 2007
RO Number
28380
Messages
186
What is the smallest M/Y that Jack Hargrave designed for Hatteras? Was it a 36'37'38'40' or 42'? What year? Was it a successfull and popular model? What is the most popular smaller M/Y that he designed for a boat builder?

Thanks, Phil
 
The experts would be over at the Hatteras Owners Forum elsewhere on the web (can't link it here). Hatteras made boats that small way back when, but i am not positive as to who designed them all, maybe Jack did. The Prairie and Atlantic trawlers were very nice smaller boats that he also designed. Obviously, I think he was designer of the greatest boats of all time! ;o)

George
Hatteras 56MY
Boston Whaler 130 Sport
 
I'll have to do more homework. Both of your comments regarding his design convinced me any boat designed by him is a big plus! Maybe all the Hatts between 67 and the late 70's are his design. I also took your reccomendation and went to the Hatt site. Thanks
As soon as I get off eating soup and back eating steaks! I'll be in the market! I can't wait!
 
"Both of your comments regarding his design convinced me any boat designed by him is a big plus!"

Just remember, while he was the designer, he was not necessarily the builder. So while his design might have been good, the execution of it could be lacking. And was, based on some of the boats he designed that I have run.
 
Guess it depends what you consider a M/Y. Some might consider the Praire 29 a motoryacht. Any Hatteras built in the 60's, 70's and 80's should have his name or the "J.B. Hargrave" (company name) on the lines drawings, from the original 41' Knit Wits, followed by the 34 footer right up to the 1992 82' Hatteras sportfish. He submitted 158 designs to Hatteras from 1960 till the time of his death, 110 of those went into production. What an accomplished man he was, from small wooden boats in the 1950's to 300' yachts and 600' barges later in his career, plus the designs for Mathews, Burger, Trumpy, Palmer Johnson and Cheoy Lee to name a few.

Google "The Yachts and Ships of Jack Hargrave", kind of pricey, but a good read with plenty of pics and sketches. Makes a good "coffee table" book.
 
That's a good point Bill. Mike, Did Jack H. design the origian 41 Knit Witts? I was thinking of an older 38' to 44' Hatt or whatever builder. They are roomier than todays 38' to 44's. I'm also looking at how livable, reliable, and seaworthy they are in this size.
Oh I almost forgot! Pascal thanks for the link! I even had my wife looking at them!!
 
He sure did! I’m surprised his name’s not more synonymous with that first Hatteras hull. He was still working as an apprentice in the Rybovich office in 1959 when Willis Slane approached him (after speaking with a half dozen other naval architects) with his idea of building a fiberglass hull that would withstand the pounding of the offshore waves. And he had plenty to do with building “Knit Wits”, when asked later on in life how he came up with the laminate schedule for that first boat he said he just built fiberglass panels of different thicknesses and drove his car over them till they didn’t break, and that was the hull thickness! What if something catastrophic/tragic happened on that first boat, and the investors pulled the plug (pun intended), I doubt we’d have ever heard the name Hatteras.

Don’t discount the old Bertrams either, they were only a year behind Hatteras with their introduction of fiberglass boats. Perhaps you’ve heard of C. Raymond Hunt? His deep-v hull was a hit as well. I just read somewhere recently a famous old time fisherman quoted as saying something to the effect of “In the perfect world we’d ride out to the fishing grounds in a Bertram, then step onto a Hatteras to fish”. That’s cause the deep v hulls cut through the waves better, but with the hard chine and hardly any keel they roll more when at rest/broadside to the waves. The Hatteras, on the other hand, has more of a rounded bottom/soft chine and bigger keel which makes it more stable at rest.

Good luck in your search!
 
IMO there are many boats with decent hull designs. Study the features of his designs that appeal to you then look at other designers, you will likely be pleased to find that good design is not limited to Hargrave. Also be aware that hull design/ seakeeping doesn’t scale down very well. I'm sure Hargrave designed several different hulls for Hatt.

What’s so special about bow flare, deep forefoot, moderate V sections forward, short keel, and flatish aft sections????

PS: I congratulate you on being interested in what's below the water line. If more power boaters took an interest we might see better boats.
 
the other day crossing over the big bend, the seas weren't too bad but good 4 footers on the bow and i was still surprised how well that 53 was cutting thru. bow would rise and come back down just splitting the next wave. obviously it wasn't rough but the hull just cut thru very comfortably. no slamming, no banging, just cutting.

I'm always amazed at how much room those older boats have compared some newer ones. if you look at the 38DC (mid 60s vintage) it has a lot more room than contemporary 38 footers. Same with the 53MY... in fact when you look at the current sales litterature for the new 56 Hatt MY, it's funny to see that some of the stuff they're bragging about like the aft deck size, tender size, side decks, etc... were just as big 40 years ago.

got to wonder sometimes what did boat builders and designers learn in 40 years...
 
Back
Top