Lowrance HDS help

folieadeux

Member
exMember
Joined
Jul 9, 2007
RO Number
27326
Messages
760
I just bought a Lowrance HDS-5 GPS unit from BoatFix for an employee and I am helping him learn to use the unit.

It is the most frustrasting GPS I have ever used.

If you know anything about the HDS units I could really use some assistance:

1. How to display only a single chart on the screen. The only display I can get is a split screen and I really need a single full-screen display.

2. How do I add a waypoint to a route once I complete a route. There seems to be no way to extend a route once you have finished it.

3. Is there an adjustment setting to the toggle knob when plotting routes. The toggle jumps all over the screen when I try to move from one waypoint and set the next waypoint.

I have tried the Lowrance customer support center and the online support but that was worthless. Even the manual with the unit is horrible.
 
Displaying a single chart or sonar display is easy. Press the "pages" button then scroll UP to the top line, then press "enter". Side scrolling selects the type of info to display, ie: Chart, Sonar, etc. Any line with a "+" adds that display to the display on the top line.

I don't use the charting stuff of the unit so I can't help you there.
 
I should mention that if you "long press" pages it does NOT bring up the page selection menu, it simply changes the focus of the split screen that gets button input. Just press and release to bring up the screen selection menu.
 
Back
Top