mooring anchor installation

fasteddy

Member
exMember
Joined
Nov 7, 2005
RO Number
19490
Messages
109
Hi guys, no I didn't die, just preoccupied with other stuff. Ok, so I upgraded to 30' Trojan Sea Raider and am in the process of securing a mooring. I am trying to find instructions on rigging and installing the mushroom anchor, buoy, pendant etc. I know there are guys who do this for a living, but I prefer to do things myself, then I have only myself to blame. I guess I am looking for diagrams on rigging the chains, the bottom chain and the one to the buoy, and for the pendant and bollard set up.
 
Get yourself a copy of Earl Hinz' "Complete Book of Anchoring and Mooring" . Should be on every boater's bookshelf anyway, and has all you need to know for your project.

Have Fun!

George

"Incentive" Hatteras 56MY
 
Try Chapmans - Chapter on "permanent Moorings"
Shows set up, materials needed, sizes required for a wide range of boats, etc. Their example is with a mushroom anchor but you might want someting different depending on where you'll be moored. For example, I have a 3500 pound granite block in a high current area for my 21' I/O. Your mileage may vary.
 
Be prepared for some heavy lifting and rowboat towing to get your stuff in position. Use lots of chaffing gear to avoid scaring your workboat. Not especially easy for part time work.
 
What is used varies in each area depending on bottom & local regulations. I have never kept my boats on anything else except revolving moorings. Mushroom anchors are not used around here. The opinion is that if the anchor is pulled in a storm you don't have much weight down there to stop the dragging to shore.

The mooring weight of choice will be something very heavy for the size of boat such as a crane counter weight, a cylinder sleeve from a generation plant or something as such which is very heavy. These things develop terrific holding power especially after a few years when they have settled into the bottom or, better yet, pumped into the bottom from the day of installation.

Add destroyer chain for bottom chain then riding chain of at least twice water depth then bridle & you have something you can feel safe with, provided the boat has a decent mooring bit.
 
Ed> Our creek is a muddy bottom, and I put a 400lb. mushroom in with 10ft 1/2" chain, then a swivel shackle, and then another 10ft 5/16 chain thru a 36" round mooring ball. A swievl shack on top of that.
I have had a diver change the chain in the past few yrs. and the mushroom has pretty much buried. I put our 43 MY there feom time to time, and have blown 35 with no drag.
btw..I balanced the mushroom on 2x6s' on our 22 ft bowrider swim platform, and slid it off when I got to the position. This sits in 6 1/2 ft of water.
It is available for all in front of the house on Fishing Creek ,just north of Thomas Pt. It has our name on it RHOADS
 
a fairly inexpensive alternative to a purchased anchor is a pair of engine blocks from a local scrap yard, chain em together with destroyer chain as suggested by others. you won't feel bad about leaving it on the bottom in 5 years for a fresh one. if you have mud/sand in your area this works best if you strip out the block so it sinks with as many holes in it deep into the mud/sand.
 
As an alternative should the weight problem of engine blocks be overpowering, you can use a large galvanized washtub (s). Put it onto the delivery boat on some type of skid arrangement. Then mix up several bags of redimix cement, inserting any ole type of securing rig to which you fix the chain. The technique can vary with no problem, just get a heavy usable weight on the bottom without screwing up the workboat or your ole bod. This scheme worked well for me along the Mandarin portion of the St John's River. Took care of a 23-ft sailboat for a number of years.
 
check out this diagram...[http://www.mushroommooring.com/Mooring_requirements.html].
 
Also remember that some municipalities require an annual or semi-annual mooring inspection so you might want to check with the local "powers that be" (or fellow area boaters) before you get too carried away.
 
Thanks for all the replies guys, our harbor commission limits the type of anchor to mushroom and the recomended weight is 300lbs. The bottom is mud.
 
quote:

Originally posted by saltysam

Then mix up several bags of redimix cement, inserting





Is that what they did with Jimmy Hoffa??????
 
Back
Top