Night Vision Binoculars

Lakesponge

Member
exMember
Joined
Jan 1, 2000
RO Number
847
Messages
249
I'm looking to add a pair of night vision binoculars to the bag of boat toys/tools. I've been looking on line and have deciphered the difference among the different generations. I'm in the military and also have used what works to best but can't afford to buy the best for my boat.

I'm looking for night vision binoculars to use when we are spending the night on the hook, deep in the mountains and also to use as we cross the lake late at night at a high idle. We expect to move in a few years to a warmer climate on a navigable river – more on that later.

I'm looking at the older Gen 1 system and am looking for a system that does not continuously use the batteries shooting out an IR beam. Am also looking for a binocular, not a monocular. It doesn't have to magnify too much and I don't want to wear the goggles with the contraption that it comes with. A good warranty would be a plus as well as a common type of battery – something that's affordable. Several of units I've seen come with jacks that you can use a digital camera or video recorder with and others have an AC adapter to run the device. – Both would be helpful.

Does anyone have any recommendations as for what to look for – do I have my priorities right? And and recommendations on what to buy or what not to buy?

Thanks

Jim
 
I'd try and get at least a second Gen set.

And I like the monocular version because that way you keep one eyes night vision intact.
 
First generation is more than adaquate for collision avoidance. Continually holding the device will be a real pain in the arm. Many of the "binocular" units are really monocular with the light path split for two eyes.

I have one in my bag of toys and don't use it beyond prowling the neighborhood.
 
I have a third gen. device that I have found modestly useful, but very fun. Amazing how much stuff is out there moving at night. Even more useful however, has been a pair of laser range/speed finder binoculars. They claim to be very accurate at close range, and so far I have no argument. I find them very useful when I'm swinging on the hook in a close anchorage (No Name Harbor). Early in the evening I pick a point at the apex of my swing, then I check the distance. If I'm worried about drag, I can check the distance again. I can also check the guy in front of me with a scope of 1.5. They work just as well (if not better) in the dark, and have a range of over a thousand yards. Accurate to less than a yard.
As far as running at night, I'm sure night vision will help with other boat traffic, but I'm not sure you would be able to see objects in the water (eg, deadhead) unless it was absolutely flat calm.
 
was also military (Navy) and saw the best cant afford it either. I had a set of Gen I took them back. go at least GEN II. If you want a bino type you can find surplus russian sets Gen II on the internet or somewhere like sportman guide. these can be had for $200 or less if you shop around. Most are converted to use AA batteries if not the conversion is easy. also a good set of glasses 7 X 100 can bring in lots of light at night and may be a cheaper solution.
 
I had a Gen I monocular. I was NOT impressed. Frankly, a good set of standard binocs was more useful ( and didn't need batteries! :) ).
 
At a minimum go generation 2 if posible generation 3 nightvision it is like night and day. Thermal imaging is really the best way to go but expensive.
Bill
 
I've offered most of this before but hope it may help a little once again:

I've had friends tell me they threw away several gen 1 & 2 units both because of marginal ability to recognize what they need to see out on the water and because of the short life of the relatively low cost Gen 1 & 2 units' intensifier tubes. They have been surprised at the performance of Gen 3 compared their 1 or 2's. I have used an ITT gen 3 NV 160 monocular device (my B-I-L's) for many years (~10?) of rare use on board our boat . It takes a little getting used to (focus front & back, & image is only hues of green and grainy, with fuzzy image toward the edges), but if dialed-in correctly it can be a huge help on very dark nights to easily see every little wavelet & pot buoy very well at considerable distance in the "mine fields" . It's not like looking at a new color TV image , more like an early '50's mono TV broadcast, but then compare that to looking at that same TV that is off without the NV.

I like the monocular version over the binoc type as the NV image does tend to suspend normal eyeball night vision & this effect is less on the eye not held to the NV unit so I can still see reasonably well out of that one when I put the NV down. This unit has a 2X accessory lens and IR illuminator source in the kit but I have never used, needed or wanted them. The blackest nights outside are revealed. When an unlit boat of fisherman 70 or more ft away could only see my running lights, I can sometimes tell whether there is a lure or squid on the line one of them is about to put over.

It doesn't work well in fog (lens fogs with mist & one wouldn't be able to see any farther than would be possible in fog in daytime anyway) or well-lit areas (overwhelmed by light, but doesn't hurt it though some earlier generations could be damaged ,) but on a dark night if I had a M.O.B. or other boat in need situation I would surely be thankful to have this unit. The 2 regular alkaline AAA's last over a year, and there have been no tube breakdowns or degradation of image . I most often use this from the marlin tower station or open cockpit as the lower helm would tend to have undesirable reflected own-boat light, (gauges , etc.,) if trying to use NV through the windshield or canvas clears that are never removed. At the lower, I rely much more on radar for night travel.

From personal use and everything I have heard of friends' experience, I'd really suggest Gen 3 or not at all.

BTW - you wouldn't believe how many stars there realy are above use until you look up with NV! :D
 
Don't waste your money on a Gen1. You wil not use it at all. If really want one, just save up for a used Gen3. I have the ATN PS-14, it's super light and pretty much waterproof. It is a mono, but I have a magnifier and it works great in the open water.
 
I have thousands of hours of night boating, and own a gen 2 night vision scope--which I rarely use. With a good pair on 7 x 50 binoculars you can see items which you will not see with the naked eye. You will not loose your night vision--which is critical. There are some real issues with binocular night scopes on boats--especially if you all of a sudden are hit with a bright light.

I agree that a FLIR or Gen 3 scope would be far better than 1 or 2. But personally I don't believe it is worth the cost for a recreation boater. Law enforcement--yes.
 
Sandy:

I am interested in buying what you have. Can you give me an approximate cost?

Thanks
 
I too have a Gen 3 PVS-14 by ITT (same tube as the ATN brand), which is the same monocular unit our troops use. It is AWESOME! The ITT NV Marine or Nightquest 160 is no longer available, although can be found on ebay. I use the PVS14 when boating at night to scan for traffic, The monocular type allows for retention of night vision on the other naked eye --the scope will kill vision in the aided eye.

There is a lot of info about night vision on the web, and I would recommend sticking to Gen 3 scopes.

"PVS-14 Alpha. The PVS-14 Alpha is currently used by the U.S. Armed Forces and Special Ops Units. Powered by ITT Gen 3 image intensifier, the system has recently been redesigned to operate on a single "AA" battery. The PVS-14A includes a built-in IR illuminator, fully adjustable headmount and mil-spec multi-coated optics. Automatic Brightness Control and Bright Source Protection are standard. The manual gain control feature allows the user to increase or decrease image tube brightness for best possible image contrast in high and low light conditions. The most versatile night vision system on the market, the PVS-14 Alpha can be used hands-free, weapons mounted or attached to a camera or camcorder for nighttime photography. Five Year Warranty on the ITT Image Intensifier and all PVS-14 Alpha components"
14alpha3a.gif
 
Joe - The decent ones are a bit pricey. I believe the one I use was about $1750 maybe 10yrs ago and went up another maybe $4-500+ I think before it was discontinued, as Ken mentions above. There is one Google "ITT NV 160" return site that advertises the ITT Night Mariner 160 ( yellow version of the black one I use) for under $1600 "cash, add 3 1/2% for cc" but I'm not sure about it's authenticity.

Ken's really nice-sounding gen 3 ITT PVS-14 seems to be offered by varius online sites for between $2900 & $3900+ but most common price appears to be $3400 for what I think is the same model. I'd love to try one of those out . I wonder if the head-mount device is independent of need for helmet and if it would be stable enough for boat use in moderate seas. That would be great having both hands free for wheel & controls.
 
Sandy,

You are spot-on with your comments. I think I paid $3100 for mine. I also believe that the ITT Mariner/NightQuest models use the identical tubes (perhaps without the "Mil-spec" optics) as the pvs-14.

One thing I learned about civilian night vision is that we get "military second" tubes from ITT. Basically this means that there may be "spots" (or pixals for no other good term) that may be in the view. These are often presented in a certificate that will show where these spots are. I purchased an ATN brand that had these "spots" in the center area of view, and then sold it on ebay. I investigated further and found that that there are different grade of tubes available to the civilian market.

The ITT brand of NV will offer a higher yield of quality tubes then others. My ITT scope has some of these spots on the perimeter of the view. However, other brands will also advertise a better grade of tube also. Just a heads-up for folks to consider.
 
That's very interesting, Ken. Thanks. I think my B-I-L may have purchased this one through a fire dept which may have lowered the price a tad but I would imagine those units would still be "civilian" quality. I'll look for those spots if I remember next time I use it.

FWIW- I have NO idea of the truth to this but I have read a couple times that at least some of the Russian-originating models may rate as , say, Gen 3 , what the US ones rate as Gen 2. If anyone is considering one of these imports it might be worth asking about that.
 
I've done quite a bit of all sorts of things on boats with the AN/PVS-14.

I would absolutely go with a monocular vs. a binocular. First, you'll retain normal unaffected natural night adapted vision in the unaided eye. If you're mounting the device, you have one unaided eye for near-distance vision and operating your navigational electronics. Monocular is also lighter and easier to 'wield' if you're not mounting it. As someone mentioned, the PVS-14 uses either one or two normal AA batteries.

Problem you'll face with the older Gen 1/2 units is that any incandescent light source will 'washout' your aided field of vision (nav lights, electronics, et cetera).

Sandy - the headmount is a strap/pad/ballast type arrangement that obviates the need for a helmet to mount it on, but uses the same hardware to do so. In other words, it has the same piece on the front that a helmet would. It is fairly stable, but it takes a bit of practice to get used to using the right eye for the right purpose (aided eye for distance and monitoring wave action, unaided eye for electronics, compass, inside the pilothouse stuff).
 
Sounds good, Mike, Thanks. With respect to the "other " eye, I've found there is some sympathetic night vision loss but not as bad as the one to the eyepiece, and not as long lasting getting back to normal. The lower generation units also are reported to have substantially shorter max distance they are useful for in order of 1,2,& 3,etc..

Sorry, Lakesponge, I'm afraid we haven't been too encouraging in terms of your original purchase priorities.
 
Yeah, the bad news is that the older units (the so-called Gen I and II) just don't work out on boats. Too much incandescent light pollution, too little benefit. Your running lights, nav displays, and instrument lights will washout the picture. I've used all sorts of NV devices over the last decade, and the current device I use is the only one that's really worth using on the boat for aided approaches, MOBs, maneuvering, and for the lookouts.
 
Sidebar question:
The PVS-14 site has the following caveat:
" Export of ITT Night Vision products require an export license from the US Department of State, Office of Defense Trade Controls, in accordance with international traffic in arms (ITAR) Title 2, Code of Federal Regulations."

Ok, I understand the no sales outside of the country stuff, but does this rule prevent me from using/having the unit aboard if going to: Venezuela? Bahamas? Mexico? ( I can guess the answer for Cuba... )
 
Well, that was certainly informative and that’s what Boatered.com is all about. Based on all of the above, I think the US Mil Spec Gen 3+ is out of my price range right now. I think I’ll borrow a set and see how it works, sort of test it out (with some supervision of course). I will switch my thinking to monocular vs a binocular and will search for a deal.

Thanks.

Jim
 
Back
Top