B
blouderback
Guest
I got a little worried today when cruising up the Delaware. Normally, the tachmoeter reads about 2000 rpms at 20 mph, 3000 rpms at 30 mph, and WOT is about 4600 rpms and about 50mph. Today I was pretty heavy, yet the rpms showed about 4500 at 30mph. At first I'm thinking that the prop hubs have spun, but I'm pretty sure there are no hubs on a Bravo III. Performance did't seem off, and the engine didn't actually SOUND like it was running that fast. Nonetheless, I made sure to keep it under 4500 rpms. I was watching the tach like a hawk.
After a few miles, I look down and notice that were doing 30mph and the tach is right at 3000 rpms. I goose the throttle, and the rps and speed rise appropriately. I got WOT (for just a few seconds, 'cause the Admiral starts yelling at me that we're going too fast), and it never gets over 4500 rpms. All is well!
On the way home, same problem. This time, I tap the tach with my knuckle, and instantly it drops down from 4500 rpms to 3000 at 30mph.
What's going on???
After a few miles, I look down and notice that were doing 30mph and the tach is right at 3000 rpms. I goose the throttle, and the rps and speed rise appropriately. I got WOT (for just a few seconds, 'cause the Admiral starts yelling at me that we're going too fast), and it never gets over 4500 rpms. All is well!
On the way home, same problem. This time, I tap the tach with my knuckle, and instantly it drops down from 4500 rpms to 3000 at 30mph.
What's going on???