PC mapping programs

folieadeux

Member
exMember
Joined
Jul 9, 2007
RO Number
27326
Messages
760
I have just upgraded my Lowrance GPS/chartplotter and Navionics map card and I have gotten very interested in purchasing a mapping program for my home PC. Does anyone have experience with using either the PC-Planner by C-Map or the Navplanner by Navionics?

I am using the Navionics Gold card in my Lowrance unit. All I really want to be able to do is to sit at my desk PC and plan my routes then be able to transfer the route into the Lowrance unit.
 
I have an older lowrance that uses a little chip/card that you load into your pc and map your route then transfer back to the gps and transfer the data to the gps. Complete PITA if you ask me. Much easier to get a separate power cord and run it off a little 12V converter at home and bring the GPS home to input things directly.
 
You can download Raymarine's version of Navionics Navplanner for free from their website. It's tailored to the Raymarine equipment but you can get an idea how the maps look and how it works before purchasing.
 
quote:

Originally posted by folieadeux






folieadeux,
Navionics maps will only work with their Navplanner and that will allow you to chart and upload to your unit. I called the company last week and that's the only way it will work is with their products. You also have to have an extra memory card because you load your route on that for the transfer, not the map card.
 
Shake n Bake

Do you know if the Raymarine version of Navionics is compatible with the Lowrance GPS/Plotter?
 
Raymarine's version is only compatible with Ray's equipment but it's free and you can get a look at the product and evaluate it before buying.
 
check out nobeltech's website. they have a variety of PC mapping software that range from basic to very sophisticated aimed at commericial shipping. the software is easy to use and first class. i use it on my laptop along with a hand held gps as a back up paperless navigation system. it will allow you to create routes and waypoints and if your plotter allows, you can upload these directly to your plotter on board. huge time saver and a whole lot easier than creating the routes and waypoints on your plotter.
 
I have PC-Planner from C-Map. I can't remember what I paid, but it came with a USB chip reader so that it reads the chart chip from your unit. I also have Garmin MapSource. The PC-Planner is not very good. Garmin is the better of the two by far. Each program only works with their respective charts. Therefore I would not think that either would be good for your Lowrance system.

Mark
 
For C-Map/Jeppesen PC Planner users (or would be users): if you bought it a while ago, please note that it is enormously improved over the original version (which, yes... was a little buggy). Planner software upgrades are free, just give our Customer Care a call and we'll ship it right out.
 
A little buggy? Sorry Amy, it was crap!

Several years ago I spent good money on what was not much more than beta software, received ZERO tech support and will do whatever I can to use other manufacturers chips and nav software going forward. Releasing buggy software does not build good will with loyal customers....
 
Hey Amy,
What is the phone number for customer care? Is is the same number as C-Map club?

I got my spring chip update and PC-Planner will not read it! I has some issues with PC-planner after I first got it and I got some support via email from someone in Europe. I sent email to pcplanner at c-map.com and got no response this time.

Mark
 
i've got pc planner and i wouldn;t recommend it. it's buggy, not intuitive and not so easy to work with.
 
Amy:
I found the PC Planner also to be a BIT BUGGY...I would certainly not call it crap...As far as the support from C-Map,I have recieved nothing but the best support from C-Map and DigiBoat when I was going through the hook-up of my laptop on the boat for my navigational needs...
I would think that the software was updated as a result of positive feedback from loyal customers like myself and thousands of others...
I have the highest respect for you and the tech support that I recieved from C-Map...
My C-Map chips are now 4 years old...How do I go about upgrading?...
 
Years ago we bought a Furuno with Navnet. It's classic. Too bad all the new chips are not compatible. But the worst of it is they take a mess of chips to get the same coverage so it costs far more to upgrade an old system with old chips.
Me I use Nobeltec and upload the routes. The lap tops go everywhere and don't need anything special other than the cable to hook up to the unit(s). It also drives our garmin handheld quite well. And, their charts are always compatible with their software...
 
quote:

Originally posted by jtybt15

I have an older lowrance that uses a little chip/card that you load into your pc and map your route then transfer back to the gps and transfer the data to the gps. Complete PITA if you ask me. Much easier to get a separate power cord and run it off a little 12V converter at home and bring the GPS home to input things directly.






Agree. I had an old Garmin and planning on it worrked like a charm in the comfort of my living room.
 
I was in the wheel house for a passenger ferry a few weeks ago and the captain was using his laptop computer with a gps antennae along with maps which he said he downloaded from somewhere like the Coast Guard or some government website. It was really great.
 
quote:

Originally posted by jjones

I was in the wheel house for a passenger ferry a few weeks ago and the captain was using his laptop computer with a gps antennae along with maps which he said he downloaded from somewhere like the Coast Guard or some government website. It was really great.






Right up until you need to read it in the sunlight.

I think marine GPS is so expensive when compared to others due to daylight readable screens. I could be wrong.
 
Sorry I didn't get back sooner folks!

Now, yes, several YEARS ago (remember, this is still a relatively new industry!) the original PC Planner was... very buggy. But it truly has come fathoms from that first few editions. It is a quite inexpensive little program, and most people love it. We actually use it in house to view our own charts.

We also have a full time Tech Department now, several years ago Customer Care (where I started out) handled everything, from dealer orders to tech questions to retail orders. Believe me, we've grown in the decade I've been here!

So here are some answers that I hope will be helpful:

-The PC Planner program upgrade is free - just call us and we'll send the cd!
-Tech Support is available, just give us a call!
-The older Furuno (and other) chartplotters may not be able to use MAX Library charts, but we still fully update and maintain the NT+ that you use (which has no less detail).
-We fully update our NT, NT+ and MAX Libraries each Spring and Fall - just give us a call to update, upgrade or trade around your chart cards.

Have I missed anything? Let me know!

Here are the numbers:
Call 800-424-2627 or 508-477-8010
Choose '1' for Customer Care (updating, Club Jeppesen, upgrading, product inquiries, chart coverage questions, etc) or choose '3' for Tech (PC Planner usage, anything malfunctioning). The phones are manned from 8:45am to 5pm EST, with Monday and Tuesday always the busiest days and the busiest season mid-April through mid July (let me apologize in advance for those of you who call in May, there's just no way around the fact that this is a dramatically seasonal business!).

You can also email me directly at clubdesk (at) c-map.com, I'll be glad to help if I can.
 
Amy

Will your product work on my Lowrance GPS with a Navionics map chip?
 
Back
Top