Polyform or Taylor Made

Bob
You have a very big Express, one of my favorites, at over 48’LOA and 32K lbs- you need ‘Binford’ fenders
I use the Taylor Big B 12/34’s –used them before on my 41PC- I have some Taylor 15” round fenders as well

I also have a bunch of 12x36 inflatable fenders – I picked a set of these up last year on a whim because they were 50% off at worst marine-got more after using them

These are great-they deflate and fold up when not in use- we use these a lot when cruising – Last October while at the Oyster Bay oysterfest the winds kick up over night
The changing winds and heavy rocking worked one of the fenders up onto the dock and the boat was pinned against the dock - our boat is 50K lbs loaded and there was no way I could push the boat under those conditions. I took one of the inflatable fenders and slid it between the dock and the boat during a wave cycle and then just pumped it up to push the boat away from the dock
http://www.stowawayboatfenders.com/howtheywork.html
 
Rommer (John),
I will take a copy of those instructions too please! Unless your gonna make them for me?
I sew, but with a needle and thread! No Machine!
 
Looks like taylor made needs the warrty as the fenders keep loosing pressure. Not one negitive comment about the polyforms .... One would think to go with the polyform ..

Rob
 
Abalmuth,
Thanks for the compliment. I recall when I was on your boat a few years back when you were up on the hudson for a raft up. That is one big boat. My wife and I loved it and appreciated the tour.

I like these inflatables. They are interesting. I could go with the inflatable 12 x 36 and use the 10x26 Poly/Taylor. This will provide me with a better option.

Robski97,
What are you using?
 
Bob,
I use the HTM 4's. I have the polyform socks for the fenders as I have the colored hull. Then I got the fleece fender covers as I was afraid of fine scratches. ( COLORED HULLS SUCK ) I have had one size or another of the polyform HTMS for over 10 years with out a problem. The Maine coast fleece fender covers are pretty cool.

Rob
 
My Polyforms are 10 years old. Only put air in them twice.
 
I have 4 BIG poliforms, over 5 years old. I've mashed them against a lot of docks and thru many cruddy lock walls. They always clean up well and I've only added air to one of them , one time. i like the valve syatem on the poliforms better than the Taylor made I've had before. If I need to replace, I'll go with poliform next time.
 
I have a several year old Polyform 8x20 where the top has blown off. Polyform's website warranty section says you need a receipt for their limited warranty. I emailed them saying their response would determine whether I purchase Taylor or Polyform fenders in the future. Will post what they say.

Does anyone have the receipts for their (maybe) five year old fenders?
 
Polyform emailed me back and said I should mail the fender back and they would evaluate it for manufacturing defects.

The fender (8x20) costs $43 on Amazon.

I assume it will cost me $10 to mail it back and then still no guarantee they will say its a manufacturing defect and send me a new one at no cost.

I do not think their limited warranty should require a sales slip. They know its their fender and the limited warranty mentions nothing about a limit on how long it was in use. So the point of requiring a sales slip is what? To cut down on the number of warranty claims?
 
I just returned a Taylormade hullgard to West Marine after 5 years of use. The valve was leaking, must have started this winter. I must say WM was very easy to deal with. They exchanged it no questions asked. I will definitely buy Taylormade hullgards in the future and I'll probably buy them from WM. I don't think the entire Taylormade line carries the same warranty, though.
 
Back
Top