Prop repairs in CT

Passingthru

Member
Joined
Mar 4, 2009
RO Number
31098
Messages
10
What's the best way to repair a small ding in my port prop at the edge of the blade ?

I have the yard looking at it today and my best guess is it will need to be removed to be repaired.
 
How small is "small"??? DEPENDING ON THE DING, sometimes you can hammer them out with a block of wood and a hammer, and dress them down with a file.

If it still concerns you, take it off and send it in.
 
Given the size of your boat/engines/props I would suggest you remove both props and have the port one fixed and both of them scanned and trued up to spec.
 
IMO the best place to get any prop repaire and tuned is a PropScan shop which do computer tuning and provide you with a before and after printout of your prop's performance specs. If repair/tuning is necessary do a search on PropScan and look for the one that's most convenient to you.
 
Thanks for the feedback...

Willie, The ding looks more like a bend at the edge of the prop. The tip is bent about a 1/16 of an inch and about a 1/4 to 1/2 inch in length.
 
Personally I'd try to hammer a ding that size out, but it's your call, and your $$$.
 
Hale Propeller in Old Saybrook, They invented the "Hale MRI" / PropScann that many other shops in the world use.

Ask for Randall Hale SR. Tell him Jeff from Precision sent you.
 
Essex propeller. They also do great repairs to damaged outdrive cavitation plates (the voice of experience - sigh)
 
Back
Top