Rafting up in a no wake zone is easy, and the boats can be pulled tight together. However, rafting up where you can get waked is a completely different animal. It happens frequently here on the river, but you better know what you're doing. If you can get waked, DO NOT pull the boats tightly together, you need to allow them to bounce independently. DO NOT tie lines straight stern to stern or bow to bow, tie up bow to midcleat and stern to midcleat, using a springline approach (think about how you tie up in a slip to allow for tide changes), so that the boats can move up and down independently but not slide forward of each other in a way that would render the fenders irrelevant. Fenders have to be positioned so that they protect BOTH boats from the other boat's rub rail and so that they don't get "caught" under the opposite bow's rub rail during up and down motion. The proper way to tie boats will vary with different boats and depending on size differences between the two boats. When wakes are possible, a two boat raftup is my maximum, I don't want to be sandwiched in such a scenario. My friend Jason that I raft up with frequently just got a larger boat and we're still figuring out what the optimal way is to tie my boat to his. What worked with one boat might not work for another (different rub rail heights, lenghts, cleat positions, etc). And regardless of how well you do it, be prepared to go monitor the situation with a boat hook in hand when a big wake is approaching.