Remove waterline tape?

Joeshoes

Member
exMember
Joined
Jan 1, 2000
RO Number
1967
Messages
601
My boat has factory installed tape just above the waterline that has peeled off or worn off in places.

I have ordered new green tape and am wondering if there is a good way to remove the old, use acetone. WD 40??? If I leave it on and tape the new over it it will look bad.
 
Try a blow dryer or a heat gun. Then clean up with acetone.
 
quote:

Originally posted by stmbtwle

Try a blow dryer or a heat gun. Then clean up with acetone.






I have tried both. The heat gun is the better way to go. They are less than $30 at harbor frieght.

A rubber wheel on a drill works great as well. It takes glue and all.
 
I will second the rubber wheel. While getting ready to repaint my boat I had to get rid of a bunch of tape ,along with the boat name and calling port and the wheel worked great.
 
that would be the 3M Graphics Eraser. I get mine at NAPA. Won't go back to the heat gun.
 
quote:

Originally posted by Gregory Saracco

that would be the 3M Graphics Eraser. I get mine at NAPA. Won't go back to the heat gun.





I agree the 3M graphics eraser from NAPA this stuff gets everthing off.
Bill
 
Thanks for coming through for me (again)

You guys are the best
 
Back
Top