saving the shrink wrap

Brian

Member
Member
Joined
Mar 2, 2000
RO Number
64
Messages
334
I know someof the ROs have done this. Any suggestions. How many yrs did you reused it?
 
Having never had to use shrink wrap, I'm curious as to how you can save it? Once it has been shrunk onto the boat, the only way I would think to get it off would be to cut it, so how can you reuse it? Please educmicate this old fart.
 
I have never done this, nor have i ever done shrink wrap on my boat, but I would think it would go like this:

Slit it up the center, near the bow.
Slide it off the rest of the boat like a sausage casing.
Next year, slide it back on.
Attach some sort of reinforcement on either side of the slit
sew the slit together

Am I close?
 
I have a couple freinds that do 2 years without problem. One guy tried 3 and it failed toward the end of the winter.
Good luck
Niles
 
When they put the sw back on, did they reshrink with heat or just tie it and tape it?
 
I have spoken with a few people who have done this and are happy. My fear would be if it fails I hope you have good insurance to pay for the damage. My SW failed at the beginning of its first season the installer is paying for the repairs and its a costly insurance claim. I would rather pay to re-shrink next year then take the chance of a failure again. I have been up the the yard to check on the boat almost every week I hope next year I will not have to do this. Peace of mind has to be worth something.
 
We had 70+ mph wind gusts go thru here last week. My grey poly tarp and pvc frame survived and looks as good as the day I put it on. I was tired of throwing high priced shrink wrap away every spring, but would be very nervous about re-using shrink wrap in this part of the country. When it fails, it will be the worst possible time.
 
On my 17 center console, when I bought it used, the PO gave me the shrink wrap that he use for 2 seasons. I re-used it for the 4 seasons I owned the boat and when I sold it two seasons ago, I gave it to the new owner. I would imagine he's still using it.
 
I may be taking the path less traveled, but I have many concerns about reusing shrink wrap. First and foremost the investment in shrink-wrapping a vessel is minor in light of the vessel's value and considering the enhanced potential for off-season damage (due to the reused material having compromised ability to protect a vessel), I fail to see the logic in such reuse. Secondly, in the event of off-season damage, an insurance company could consider inappropriate protection of the vessel as an impediment to a claim. I have personally viewed the higher potential damage to reused shrink-wrapped vessels. Third, the increased worry of damage occurring during a storm is not worth the saving of using new material. Forth, the shrink-wrap is recycled by manufacturer (or should be), so the environmental cost of using new shrink-wrap is minor, and indeed actually helps the economy.

For my vessel the increased cost of using new shrink wrap is about $150 (I shrink wrap my own vessel)-- a trivial cost compared to the vessel's value.
 
Around here most marinas will not allow owners or outside contractors to do shrink wrapping. It is over $500 to have my boat done.
I get 3 seasons out of a wrap before I junk it. It is a BIG piece of plastic! My Bert is 33' x 12'5" beam & the hardtop is 17' above
the waterline.I also stay in the water year round.

What I do is cut the bands going under the hull. Then I pry the corners up over the transom. I then lift up onto the hardtop enough materiel
to pull everything fwd enough to clear the bow.All my framing is marked so it just goes back together the next year. I only do the three seasons
as I don't want to risk the all around belly band fraying through.
Al

P.S. For the last three years I've then been reusing the old reused wrap as the roof for my woodshed. So that makes six years that that cover
has been used.
 
What kind of damage might take place if SW fails? I pay near 1000.00 each time.
 
where my vessel is stored , shrinkwrap fails because of fatigue damage (wind) as well as oxidation and polymer bond failure (sun's uv radiation and oxygen in the air). The shrink wrap failure allows water to enter the wrap canopy where it can permeate cracks and crazing defects etc. When the water freezes, it expands these cracks and weakens the structure.
 
If you have an indpendent doing it, the best way to save money is by reusing the framing. With the usual exceptions, proper framing and strapping is the biggest chore wrapping a boat. If you can have that thing ready to rock, so all your guy has to do when he gets there is pull plastic, trim, tuck, wrap, and vent (and vent some more...), you SHOULD be able to work out a great deal.
 
I would think that the majority of the cost in shrinkwrapping would be the labor, not the materials. Am I incorrect?
 
I got 5 years out of mine on a 31 Tiara Open....no tower. To remove, Roll it up from the transom to the bow. Fold neatly. To reinstall, bring it to the bow and start to unroll it. Place it over the pulpit and unroll it like a condom...pulling it snug over the transom. Then apply some lines and shrinkwrap tape to any rips or holes.
 
The marina we're at doesn't allow any use of tarps and framework; they required that I remove the tarp or remove the boat. They also don't allow people to do their own shrink wrapping or to bring in an outside firm to do it. I object to the expense of shrink wrapping and to the limitations on customers of the marina. I had no choice but to buy a semi-fitted winter cover. Ironically, it turned out to be bright yellow in color! I expect to get 4 or more years out of it, for less than the cost of one year's shrink wrapping. P.S. I guess all customers are created equal, but some are more equal than others. Two boats that were placed near mine seem to have tarps on them, rather than shrink wrap or covers. Hmm, very interesting. Anyway, my cover looks pretty and is holding up well. A few of the boats have shrink wrap that was reused. They did tie lines around the boats and the wrap to prevent wind pull-off.
 
Back
Top