Secure an anchor schackle?

king5899

Active member
exMember
Joined
Nov 22, 2005
RO Number
19628
Messages
1,432
I am thinking of buying a new anchor and was looking at the schackle with the screw in pin. The owner of the last boat I had, lost his anchor one day after he threw it overboard and it disconnected. What is stopping it from backing out over time? Lock tite or a stainless wire through the hole?

MJK
 
Ground tackle, including anchor shackle, is one of the items on my pre-departure check list.

One of the things I check every time, before the boat leaves the dock.

Bob
 
Hmmmm, there must be a powerpole joke here somewhere..... <grin>
 
With thde Honda 2000, do you need two; one for the bow and one for the stern?
 
Given that it happened to your friend, I guess it can happen. But I have had many boats, all had those shackles on the anchor, and none were wired. And none ever backed out a millimeter. Getting the thing apart when I needed to was much more the issue a few times.

Put in tightly, and then allowing for some rust/corrosion over time, I think it unlikely one is going to go anywhere. I will stay with visual inspection.
 
quote:

Originally posted by TurboWarp

With thde Honda 2000, do you need two; one for the bow and one for the stern?






I guess it depends on whether the power cord is long enough.
 
quote:

Originally posted by Bill D.

Hmmmm, there must be a powerpole joke here somewhere..... <grin>






Cute, very cute. :)
 
By the way, I have seen a guy lose an anchor by not having the bitter end cleated or tied off.

Ground tackle now resides in 90 feet of water. :)

Bob
 
quote:

Originally posted by justgotaboat

I work as a commercial diver. We just use zip ties to secure screw pin shackles.






And when the zip tie has been there a while and eventually breaks off, you notice it missing and check the pin, yes?

My point being - well, actually, Pascal already made the point - inspect it. However you seize it, or even if you don't - a proper inspection, which need not be more than a glance and a quick grab (let's see you guys leave that line alone), will catch and and preclude any problems.

I actually prefer zip ties to lockwire for the reason I stated. You notice it missing - when it fails, it fails completely, and you notice it. SS lockwire generally fails at the twist, which makes it a difficult failure to notice. While a proper seizing still has a very low chance of failing such that it allows the pin to back out unnoticed, it takes more of an inspection than a zip tie that's either secure or gone.
 
Lockwire does not fail if you use it properly. Consult FAA document AC43-13 to properly learn how to use safety wire. (Also how to properly use cotter pins which I see much abused in marine service as well)
 
I use a ziptie.. Always check it each time the anchor is deployed or retrieved
 
quote:

Originally posted by rnbenton

By the way, I have seen a guy lose an anchor by not having the bitter end cleated or tied off.

Ground tackle now resides in 90 feet of water. :)

Bob






That DOES happen from time to time. On the other hand I lost an anchor one afternoon years ago, the bitter end WAS cleated off. Talk about a sudden stop!
 
Back
Top