water alarms

vic33004

Active member
Joined
Jul 10, 2007
RO Number
27361
Messages
1,552
late this summer i installed and finally hooked up water alarms in my racor filters. as part of my predeparture check i always inspect the glass bowls for water, but i thought the alarms were a good defense against a bad load of fuel. this w/e i found the light in the alarm on indicating that there was water in one of the bowls. i drained all three bowls and found the port main had over two cups of water in it. the bowl appeared normal from the outside and the water had a very brown tint to it. only after the water was out and the red dyed fuel came thru could i tell the water was all out. in my book that alarm just paid for itself many many thousands of times over! i've no idea how i got that much water in one of the tanks or where it came from, but i'm glad i did'nt find out the hard way it was there.
 
yes the alarms system is made by racor. you may want to call customer service at racor before ordering parts as there are several ways to configure the system. they have great tech support and can help you figure out the best application for your specific needs.
 
I always advise my clients to add those alarms to their Racors. Just because of what you experienced. I feel they are a better investment than the vacuum gauges if you are only going to install one or the other.
 
The one I installed a couple years ago its a filter restriction and water alarm combined from Racor part number RK11-1570. It has a round display with two lights, one for water and one for filter restriction, plus the alarm. Nice and clean system.
 
Back
Top