I own a 97 355MY Aft Cabin and I noticed around the outside of the side windows the gasket material is too short, and there are gaps (approx. 2 inches) that would allow water to make it to the windows and maybe leak. Anyone know where I can get additional gasket? Thanks.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Window Gasket
- Thread starter tim f
- Start date
does anything here look familiar?
http://www.taylormarine.com/hardware/slidingsidewindow.html
http://www.taylormarine.com/hardware/slidingsidewindow.html
Bruce,
Nothing in that picture is what I need. That picture shows the sliding glass. My problem is with gasket material around the stationary windows forward and aft the the sliding one. The gasket is somewhat "D" shaped, and you can see where the gasket shrunk leaving approx. 1 to 2 inch gap. I guess I could fill it with silicon, but it would take quite a bit. Has anyone tried to go directly through Carver, or they like everyone else and ignor the customer?
Nothing in that picture is what I need. That picture shows the sliding glass. My problem is with gasket material around the stationary windows forward and aft the the sliding one. The gasket is somewhat "D" shaped, and you can see where the gasket shrunk leaving approx. 1 to 2 inch gap. I guess I could fill it with silicon, but it would take quite a bit. Has anyone tried to go directly through Carver, or they like everyone else and ignor the customer?