Jabsco head leaks

W

WICKERSWAY

Member
Joined
Jul 27, 2008
RO Number
30481
Messages
17
The head is Jabsco (circa 1996)
The part/model #'s I found are 29090 - 37055 series and has the electric conversion kit installed

Small leak that appears to leak at the gasket between bowl & Base

Is there a service/repair kit available for these units or do I just replace that gasket? Are there other gaskets that may need replacing?

If someone could point me to kit/part numbers
much appreciated

THANKS
 
here: http://www.jabsco.com/files/itemdoc142681.pdf
http://www.jabsco.com/files/0663-qf_conversion-eng.pdf

Looks like the part you're looking for is # 44101-1000

Before I ordered anything I'd take the old O-ring to a good hardware store and see if they can match it.

Possibly some sealant or even grease will solve the problem.
 
Jabsco has a kit for you. Give them the serial number when you call. They will return your call same day if you call early enough They might. Recommend other parts to replace while your at it. Very inexpensive fix
 
Try mike at 978 282 5227. Have the serial number ready
 
Jabsco has a kit for you. Give them the serial number when you call. They will return your call same day if you call early enough They might. Recommend other parts to replace while your at it. Very inexpensive fix
 
I've got a number of new kits that I just took off the boat (they were spares I kept that I no longer need with a new head from Raritan). If you want any of these kits, I'll let them go for well less than retail (and I'm also in MD).

Used Jabsco Electric Conversion - 29200-0120
Jabsco Service Kit - 29101-000
Jabsco Bowl Mounting Kit - 29047-000
Jabsco Intake Seal & Elbow - 29048-0000
Jabsco Major Service Kit - 29045-2000
 
THANKS ALL
I'll take it apart this weekend.
Hoping it's just that gasket at the base. I thought there might be other possible places that might leak but from the drawings looks pretty straight forward
 
Mine leaked at the base last year. You'll need the bowl mounting kit if so. I've got part #29047-000 brand new in a bag at my office in Baltimore. $20 shipped to your door if that's the one you need.
 
I replaced mine today while doing some other PM work. Very simple
 
quote:
Originally posted by mixman

Mine leaked at the base last year. You'll need the bowl mounting kit if so. I've got part #29047-000 brand new in a bag at my office in Baltimore. $20 shipped to your door if that's the one you need.

Click to expand...


Sounds good how do we make this happen
my cell 202 369 6906
 
You must log in or register to reply here.
Back
Top